X axis help

[RobDeckert]

Here is the link:

My $5 Y Axis Stiffening Mod

To stiffen the Y axis on my 1000mm X-Carve, I used a 1.5" L bracket, a #10-24 X 1/2" round head machine screw, a star lock washer, a #10-24 nut and a #10 X 3/4" wood screw on each rail. These items were purchased at my local Home Depot. The top hole in the L bracket matches the bottom T slot in the Y axis rail. Remove the screws holding the Y axis end plate to the Y axis rail. Loosen the screws holding the end plate to the front cross member and slide the end plate out of the way. Try not to let…