About 2 months ago my x-carve started shaking / rattling when moving on the x-axis. It occurs more when moving from right to left. If you have any additional troubleshooting steps, please advise.
machine: 2016 model
controller: x-controller
OS: ubuntu
troubleshooting:
- replaced the belt
- readjusted the gear wheel
- realigned all gantry wheels and squared
- test with and without running the router, but same issue
- reseated all wires to the green connector
- reseated all wires to the gantry terminal
- unplugged and plugged in both x & y green connectors to the x-controller
- jogged the machine left and right and no issues
- ran a line test at slow and fast feed rates and same problem