So I was carving a piece tonight and the machine went haywire. I removed the piece I was cutting and checked X, Y, and Z axis. On the X, I get this. Any help would be greatly appreciated
I would check v wheels and belt tension? move your carriage to right take a look at the teeth on the belt. possibly warn and needs replacement
1 Like
Just checked the belt and no teeth missing
check wheels and belt tension
It was the servo on x. I turned it off completely and manually slid it on x axis. Powered back on and the noise went away. Weird
It is definitely jumping teeth on the belt. The tension may need adjusted…
1 Like