Hey everyone,
In an effort to troubleshoot the spindle overcurrent issue I’m having, support suggested that my machine settings may be off. It’s taking a day between messages with support, so I’m trying to run with that idea… can someone pull the settings off their Carvey so I can compare?
In Easel, go to Machine >> Advanced >> Machine Inspector and copy/paste the text in the Settings box.
Thanks!!
I won’t be near my Carvey until next week, but if you post your settings I could probably tell if something is off.
Thanks! Something I did borked my machine. I’m now getting this spindle overcurrent error no matter what I try. 
I’m hoping I didn’t fry the board!
$0=10
$1=255
$2=0
$3=0
$4=0
$5=0
$6=0
$10=3
$11=0.010
$12=0.002
$13=0
$20=0
$21=0
$22=1
$23=3
$24=75.000
$25=1500.000
$26=250
$27=4.000
$30=12000
$31=0
$32=0
$100=88.889
$101=88.889
$102=377.893
$110=5000.000
$111=5000.000
$112=800.000
$120=500.000
$121=500.000
$122=30.000
$130=300.000
$131=203.200
$132=80.000
$800=0.000
what is $800? Assuming it’s a gCarvin specific thing?
$800 is the spindle max spindle current setting.
As always, @NeilFerreri1 saves the day! At some point I must have zeroed it out, thinking it had to do with the smart clamp or something. Put it back to 1.75 and I’m back up and running.
Thanks!!
I didn’t do much, but you’re welcome!