I have finally got my machine together. now I am having a problem with the z axis cutting too deep.
I set it to cut .1 inches but it cut down to .2 inches. also my circles are ovals they are flattened in the
Y axis. I am thinking that I need to adjust my steps per inch, but have no idea how to do that in Easel.
I have already adjusted the current for the stepper drivers. Any help would be appreciated.
I found out by starting Universal Gcode Sender and in the command line typing $$ to dump the Grbl parameters. There might be a way to do this from Easel, but if there is I don’t know how.
ok i uploaded the hex file and checked it with universal gcode sender and the $$ command it shows .9i now. have to make a test cut will post how it does
thanks again