# Zero 3 axes

**URL:** <https://community.inventables.com/t/zero-3-axes/124244>\
**Category:** Uncategorized\
**Created:** [November 3, 2021, 10:43pm UTC](https://community.inventables.com/t/zero-3-axes/124244 "2021-11-03T22:43:50Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![OmariAmeer](https://avatars.discourse-cdn.com/v4/letter/o/d78d45/32.png) [@OmariAmeer](https://community.inventables.com/u/OmariAmeer)\
**Post date:** [November 3, 2021, 10:43pm UTC](https://community.inventables.com/t/zero-3-axes/124244/1 "2021-11-03T22:43:50Z")

</div>

Hello,  
How I can zero the X,Y, and Z axes by Easel at one time??

---

<div class="post-metadata">

**Author:** ![SethCNC](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/sethcnc/32/87515_2.png) [@SethCNC](https://community.inventables.com/u/SethCNC)\
**Post date:** [November 4, 2021, 12:09am UTC](https://community.inventables.com/t/zero-3-axes/124244/2 "2021-11-04T00:09:48Z")

</div>

Click carve, don’t probe, instead use manual. And click set zero

---

<div class="post-metadata">

**Author:** ![OmariAmeer](https://avatars.discourse-cdn.com/v4/letter/o/d78d45/32.png) [@OmariAmeer](https://community.inventables.com/u/OmariAmeer)\
**Post date:** [November 4, 2021, 1:53pm UTC](https://community.inventables.com/t/zero-3-axes/124244/3 "2021-11-04T13:53:07Z")

</div>

I mean, do you have a triquetra touch plate?? do you can to learn me how to use it??

---

<div class="post-metadata">

**Author:** ![MattSlaga](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/mattslaga/32/85368_2.png) [@MattSlaga](https://community.inventables.com/u/MattSlaga)\
**Post date:** [November 4, 2021, 7:39pm UTC](https://community.inventables.com/t/zero-3-axes/124244/4 "2021-11-04T19:39:03Z")

</div>

[![](https://img.youtube.com/vi/7hM51p2gBxU/maxresdefault.jpg "Triquetra Setup for Z Axis Zeroing in Easel") ](https://www.youtube.com/watch?v=7hM51p2gBxU)

This might help…

---

<div class="post-metadata">

**Author:** ![system](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/system/32/67217_2.png) [@system](https://community.inventables.com/u/system)\
**Post date:** [February 2, 2022, 7:39pm UTC](https://community.inventables.com/t/zero-3-axes/124244/5 "2022-02-02T19:39:44Z")

</div>

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.