Z axis upgrade

[EdgarHaase]

Gantry lift plates

Well that is an interesting design. I like it.

Y Axis 'Lift Kit'

The standard 2.5" of available height beneath the Z rail is insufficient if you want to carve thicker material or use a vacuum table(my next project). Our good friend @CharleyThomas in Texas makes the fantastic lift-kits for your XCarve and he made these for me. He sells them on his web site. I asked for hole spacing to match the X-Axis square gantry as I plan on replacing the thin Y-Axis rails with the square ones a bit later on. These taller End Plates give you another 1" of height beneath …