Z axis height

[DavidSohlstrom]

Brian

Here is a link to my build log with all the mods I will be doing to my machine that is in the UPS truck as I type.

Dave

David Sohlstrom Mods and build log

I’m starting this thread to document the Mods and building of my X-Carve. My machine will not be your typical X-Carve. It will start out as a 1000 X 1800 X 117 machine. It will be controlled using a Linux computer and LinuxCNC control software. It will have 4 Nema 23 stepper motors at 280 oz and a 48 VDC power supply going to a Gecko G540 4 axis driver. It will be configured with full homing and limit switches. The X axis for a standard machine will become the Y axis at 1000mm. The makerslides…