# Xcarve 65mm Spindle mounts What else is available out their?

**URL:** <https://community.inventables.com/t/xcarve-65mm-spindle-mounts-what-else-is-available-out-their/66477>\
**Category:** Upgrades\
**Created:** [January 2, 2019, 12:49am UTC](https://community.inventables.com/t/xcarve-65mm-spindle-mounts-what-else-is-available-out-their/66477 "2019-01-02T00:49:15Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![StevenNigri](https://avatars.discourse-cdn.com/v4/letter/s/977dab/32.png) [@StevenNigri](https://community.inventables.com/u/StevenNigri)\
**Post date:** [January 2, 2019, 12:49am UTC](https://community.inventables.com/t/xcarve-65mm-spindle-mounts-what-else-is-available-out-their/66477/1 "2019-01-02T00:49:15Z")

</div>

I’m looking to see what else is available as of spindle Mount on x carve what’s available out their thats a direct bolt on to plate for a 65mm water cooled spindle ?

---

<div class="post-metadata">

**Author:** ![LarryM](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/larrym/32/51450_2.png) [@LarryM](https://community.inventables.com/u/LarryM)\
**Post date:** [January 2, 2019, 12:56am UTC](https://community.inventables.com/t/xcarve-65mm-spindle-mounts-what-else-is-available-out-their/66477/2 "2019-01-02T00:56:45Z")

</div>

Not a direct bolt on, but I use a MAKITA 701 with approximately 2mm shim for the DeWalt mount. Main reason was to adapt the Makita for variable spindle speed (I get 8600 - 30000 RPM with G-code electronic modification. It will do about 8600 - 30000 out of the box with no modifications (manual mode).

---

<div class="post-metadata">

**Author:** ![StevenNigri](https://avatars.discourse-cdn.com/v4/letter/s/977dab/32.png) [@StevenNigri](https://community.inventables.com/u/StevenNigri)\
**Post date:** [January 2, 2019, 1:18am UTC](https://community.inventables.com/t/xcarve-65mm-spindle-mounts-what-else-is-available-out-their/66477/3 "2019-01-02T01:18:13Z")

</div>

Thanks for reply but looking for mounts not spindle options

---

<div class="post-metadata">

**Author:** ![NeilFerreri1](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/neilferreri1/32/84403_2.png) [@NeilFerreri1](https://community.inventables.com/u/NeilFerreri1)\
**Post date:** [January 2, 2019, 1:22am UTC](https://community.inventables.com/t/xcarve-65mm-spindle-mounts-what-else-is-available-out-their/66477/4 "2019-01-02T01:22:52Z")

</div>

I think @LarryM is saying that the Makita, which is also 65mm, fits with a 2mm shim. His solution could work for your 65mm spindle.

---

<div class="post-metadata">

**Author:** ![StevenNigri](https://avatars.discourse-cdn.com/v4/letter/s/977dab/32.png) [@StevenNigri](https://community.inventables.com/u/StevenNigri)\
**Post date:** [January 2, 2019, 3:31pm UTC](https://community.inventables.com/t/xcarve-65mm-spindle-mounts-what-else-is-available-out-their/66477/6 "2019-01-02T15:31:12Z")

</div>

Thanks im just asking whats out their as of other spindle mounts for a 65mm spindle other than xcarve one.

---

<div class="post-metadata">

**Author:** ![NeilFerreri1](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/neilferreri1/32/84403_2.png) [@NeilFerreri1](https://community.inventables.com/u/NeilFerreri1)\
**Post date:** [January 2, 2019, 4:14pm UTC](https://community.inventables.com/t/xcarve-65mm-spindle-mounts-what-else-is-available-out-their/66477/7 "2019-01-02T16:14:09Z")

</div>

There are others in the forum. Just remember that the Makita is 65mm.

> [@65mm spindle mount](https://community.inventables.com/t/65mm-spindle-mount/12147/9):
>
> Here is the mounting system. download is for Fusion360 lets keep it opensource. share/share alike [65.5mm xcarve spindle mounting system.igs](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/2X/1/1299bd04a1583253f8f2efd6142c8d4823d38d51.igs) (640.9 KB)