# XCarve 2015 model, 1000x1000, XController, Z upgrade, Phantom Screw Drive

**URL:** <https://community.inventables.com/t/xcarve-2015-model-1000x1000-xcontroller-z-upgrade-phantom-screw-drive/77418>\
**Category:** For Sale and Trade\
**Created:** [September 10, 2019, 9:12pm UTC](https://community.inventables.com/t/xcarve-2015-model-1000x1000-xcontroller-z-upgrade-phantom-screw-drive/77418 "2019-09-10T21:12:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![DarrylKegg](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/darrylkegg/32/84315_2.png) [@DarrylKegg](https://community.inventables.com/u/DarrylKegg)\
**Post date:** [September 10, 2019, 9:12pm UTC](https://community.inventables.com/t/xcarve-2015-model-1000x1000-xcontroller-z-upgrade-phantom-screw-drive/77418/1 "2019-09-10T21:12:28Z")

</div>

Looking to upgrade from my XC to a larger machine and figured I’d sell my XC.

Bought the machine at the end of 2015, just as the XController came out, so I have that versus the gshield. Also upgraded it to the 1 piece X rail as well as added the X and Y riser plates, linear Z, heavier 420oz NEMA 23 motors, and includes Suck-it dust boot.

Has a T-Track table with replaceable spoilboards between the tracks using T track from Rockler mounted to a torsion box.

I’ll include Charlie’s zero touch plate, the Phantom screw drive upgrade kit (not yet installed, still in the box) as well as 2 DeWalt routers and the IOT relay for spindle on-off.

Asking $1800.

If you’re within 100 miles of Chicago I’ll meet you or you’re welcome to pick it up, it’s mounted to a 4’ x 4’ torsion box, otherwise provide me your zip code and I’ll disassemble and provide a shipping quote (minus the torsion box).

---

<div class="post-metadata">

**Author:** ![system](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/system/32/67217_2.png) [@system](https://community.inventables.com/u/system)\
**Post date:** [December 11, 2019, 3:12am UTC](https://community.inventables.com/t/xcarve-2015-model-1000x1000-xcontroller-z-upgrade-phantom-screw-drive/77418/2 "2019-12-11T03:12:32Z")

</div>

This topic was automatically closed 91 days after the last reply. New replies are no longer allowed.