# Xcarve 1000 footprint **URL:** \ **Category:** X-Carve\ **Created:** [May 30, 2016, 12:24am UTC](https://community.inventables.com/t/xcarve-1000-footprint/24352 "2016-05-30T00:24:26Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![DaleM.Sutton](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/dalem.sutton/32/32441_2.png) [@DaleM.Sutton](https://community.inventables.com/u/DaleM.Sutton)\ **Post date:** [May 30, 2016, 12:24am UTC](https://community.inventables.com/t/xcarve-1000-footprint/24352/1 "2016-05-30T00:24:26Z")
I would love to know the footprint of this machine so I can start building the final table, that will also be used as the assembly table. Thank you for the add to this forum, and thank you in advance for any input ---
**Author:** ![GeoffSteer](https://avatars.discourse-cdn.com/v4/letter/g/7c8e57/32.png) [@GeoffSteer](https://community.inventables.com/u/GeoffSteer)\ **Post date:** [May 30, 2016, 12:49am UTC](https://community.inventables.com/t/xcarve-1000-footprint/24352/2 "2016-05-30T00:49:21Z")
> [@Assembled footprint of the 1000x1000 XCarve](https://community.inventables.com/t/assembled-footprint-of-the-1000x1000-xcarve/21377): > > I have purchased all the parts to upgrade my XCarve to 1000X1000mm but before I can assemble it I need to build a table big enough to hold it. I want’ to build a table large enough so that I can eventually also build an enclosure for the machine. I can’t find anything that shows the assembled footprint size of the machine. Can someone help me out with this. Thanks for your help. ---
**Author:** ![DarrylKegg](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/darrylkegg/32/84315_2.png) [@DarrylKegg](https://community.inventables.com/u/DarrylKegg)\ **Post date:** [May 30, 2016, 11:13am UTC](https://community.inventables.com/t/xcarve-1000-footprint/24352/3 "2016-05-30T11:13:01Z")
I built a 46"x46" torsion box for mine, fits with just a few inches to spare all around.