# XC Pro Homing Issue

**URL:** <https://community.inventables.com/t/xc-pro-homing-issue/141748>\
**Category:** X-Carve Pro\
**Created:** [March 15, 2023, 8:06pm UTC](https://community.inventables.com/t/xc-pro-homing-issue/141748 "2023-03-15T20:06:44Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![JoeVan](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/joevan/32/84162_2.png) [@JoeVan](https://community.inventables.com/u/JoeVan)\
**Post date:** [March 15, 2023, 8:06pm UTC](https://community.inventables.com/t/xc-pro-homing-issue/141748/1 "2023-03-15T20:06:44Z")

</div>

Had a weird thing happen yesterday. Fired up the XCP and when I went to home the machine, the right Y axis did not move. The left side moved fine and caused the gantry to rack. I could manually jog the machine and both Y motors drove fine during that, but hitting the Home button would result in only the left Y motor running.  
I manually jogged the machine all the way forward until the gantry hit both limit switches and then the problem was resolved.  
Any ideas?  
Thanks  
Joe-

---

<div class="post-metadata">

**Author:** ![system](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/system/32/67217_2.png) [@system](https://community.inventables.com/u/system)\
**Post date:** [June 13, 2023, 8:07pm UTC](https://community.inventables.com/t/xc-pro-homing-issue/141748/2 "2023-06-13T20:07:33Z")

</div>

Closed on June 13, 2023, 8:07pm UTC

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.