# X-Controller not turning on, but has power

**URL:** <https://community.inventables.com/t/x-controller-not-turning-on-but-has-power/66716>\
**Category:** Uncategorized\
**Created:** [January 5, 2019, 9:49pm UTC](https://community.inventables.com/t/x-controller-not-turning-on-but-has-power/66716 "2019-01-05T21:49:48Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![RandyLaukshtein](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/randylaukshtein/32/84615_2.png) [@RandyLaukshtein](https://community.inventables.com/u/RandyLaukshtein)\
**Post date:** [January 5, 2019, 9:49pm UTC](https://community.inventables.com/t/x-controller-not-turning-on-but-has-power/66716/1 "2019-01-05T21:49:48Z")

</div>

I do not know if any of you can help me with this. I was doing a 3-D carve and was in the process of changing bits. When taking the vacuum shoe off, the gantry moved forward about an inch or so. I pushed it back to close to where I thought it was, then went to my laptop to see if I could get it back to zero. I noticed the light on the X-Controller off. I then checked the power switch to find it still on. Every time I turn it on the fan will come on for about 3 to 5 sec, then turns off. the power light never comes on. I know I have proper power to the unit. Is there possibly a re-set in the unit, I do not remember one when building this a year ago. I sent an email to Inventables but I will not get an answer until Monday and its Saturday. Weekends are my only time with this. Thanks in advance for reading this even if you can not help.