# X-Controller Flashing

**URL:** <https://community.inventables.com/t/x-controller-flashing/98240>\
**Category:** Troubleshooting\
**Created:** [August 22, 2020, 10:15pm UTC](https://community.inventables.com/t/x-controller-flashing/98240 "2020-08-22T22:15:51Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![TiernanHamtil](https://avatars.discourse-cdn.com/v4/letter/t/6bbea6/32.png) [@TiernanHamtil](https://community.inventables.com/u/TiernanHamtil)\
**Post date:** [August 22, 2020, 10:15pm UTC](https://community.inventables.com/t/x-controller-flashing/98240/1 "2020-08-22T22:15:52Z")

</div>

I was in a middle of a Carve and all of a sudden my x carve went off track so I stopped it then I went to turn it off and turn it back on the it began to pulsate and the light on the X controller started flashing and now it will not work like it is locked up. What do I need to do?

---

<div class="post-metadata">

**Author:** ![BrandonR\_Parker](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/brandonr_parker/32/13853_2.png) [@BrandonR\_Parker](https://community.inventables.com/u/BrandonR_Parker)\
**Post date:** [August 23, 2020, 2:02am UTC](https://community.inventables.com/t/x-controller-flashing/98240/2 "2020-08-23T02:02:51Z")

</div>

Check that the E-Stop is fully reset …

{:0)

Brandon Parker

---

<div class="post-metadata">

**Author:** ![TiernanHamtil](https://avatars.discourse-cdn.com/v4/letter/t/6bbea6/32.png) [@TiernanHamtil](https://community.inventables.com/u/TiernanHamtil)\
**Post date:** [August 23, 2020, 3:54am UTC](https://community.inventables.com/t/x-controller-flashing/98240/3 "2020-08-23T03:54:06Z")

</div>

It is fully reset. When I press the button it sounds like it is running then when i pop it up it shuts off and clicks.