# X- control

**URL:** <https://community.inventables.com/t/x-control/90064>\
**Category:** X-Carve\
**Created:** [April 17, 2020, 9:33am UTC](https://community.inventables.com/t/x-control/90064 "2020-04-17T09:33:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![GeraldPhillips](https://avatars.discourse-cdn.com/v4/letter/g/57b2e6/32.png) [@GeraldPhillips](https://community.inventables.com/u/GeraldPhillips)\
**Post date:** [April 17, 2020, 9:33am UTC](https://community.inventables.com/t/x-control/90064/1 "2020-04-17T09:33:46Z")

</div>

can i use two x-controller spindle control at the same time so I can run bigger steeper motors

---

<div class="post-metadata">

**Author:** ![KennethConnell1](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/kennethconnell1/32/66880_2.png) [@KennethConnell1](https://community.inventables.com/u/KennethConnell1)\
**Post date:** [April 17, 2020, 2:09pm UTC](https://community.inventables.com/t/x-control/90064/2 "2020-04-17T14:09:29Z")

</div>

can you?

I like to tell everyone with enough time and money you can do almost anything.

the real question for me would be “do I want to”.

I would say it would be easier to build a new controller with high amp drivers that would do the same job cheaper and more efficient than running two separate controllers.