# X Carve software

**URL:** https://community.inventables.com/t/x-carve-software/119295
**Category:** X-Carve
**Created:** [June 20, 2021, 9:56pm UTC](https://community.inventables.com/t/x-carve-software/119295 "2021-06-20T21:56:05Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![PatrickAnglum](https://avatars.discourse-cdn.com/v4/letter/p/e95f7d/32.png) [@PatrickAnglum](https://community.inventables.com/u/PatrickAnglum)
#### Post date: [June 20, 2021, 9:56pm UTC](https://community.inventables.com/t/x-carve-software/119295/1 "2021-06-20T21:56:05Z")

</div>

Can’t seem to find the x-carve software on the Inventables web site.  
Can someone point me in the right direction?

---

<div class="post-metadata">

### Author: ![MatthewAdams](https://avatars.discourse-cdn.com/v4/letter/m/8baadc/32.png) [@MatthewAdams](https://community.inventables.com/u/MatthewAdams)
#### Post date: [June 20, 2021, 10:01pm UTC](https://community.inventables.com/t/x-carve-software/119295/2 "2021-06-20T22:01:26Z")

</div>

Its called Easel. on the website its right next to shop. It’s web based.