# X-carve pro y1 and y2 axis do not move together

**URL:** <https://community.inventables.com/t/x-carve-pro-y1-and-y2-axis-do-not-move-together/125494>\
**Category:** X-Carve Pro\
**Created:** [November 28, 2021, 2:35am UTC](https://community.inventables.com/t/x-carve-pro-y1-and-y2-axis-do-not-move-together/125494 "2021-11-28T02:35:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jimmyzip](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/jimmyzip/32/78360_2.png) [@Jimmyzip](https://community.inventables.com/u/Jimmyzip)\
**Post date:** [November 28, 2021, 2:35am UTC](https://community.inventables.com/t/x-carve-pro-y1-and-y2-axis-do-not-move-together/125494/1 "2021-11-28T02:35:15Z")

</div>

I noticed that my machine does not move in sync on the Y axis. This is very visible when I am running a carve. I didn’t notice it right away as I was carving close to the Y1 axis. The Y1 seems to be tracking correctly. The Y2 is lagging behind. So I decided to run a test carve on the Y2 axis side in the back of the machine. I have included a picture of how badly the carve is close to the Y2.

What do I do to resolve this issue?

Thanks.

 ![Test1](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/f/5/f56507e9ec8861c25572fc44f087b7db6bc88163.jpeg)

---

<div class="post-metadata">

**Author:** ![system](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/system/32/67217_2.png) [@system](https://community.inventables.com/u/system)\
**Post date:** [February 26, 2022, 2:35am UTC](https://community.inventables.com/t/x-carve-pro-y1-and-y2-axis-do-not-move-together/125494/2 "2022-02-26T02:35:28Z")

</div>

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.