# X-Carve Pro model for SketchUp

**URL:** <https://community.inventables.com/t/x-carve-pro-model-for-sketchup/120262>\
**Category:** X-Carve Pro\
**Created:** [July 18, 2021, 2:37am UTC](https://community.inventables.com/t/x-carve-pro-model-for-sketchup/120262 "2021-07-18T02:37:19Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![AdamCook1](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/adamcook1/32/87040_2.png) [@AdamCook1](https://community.inventables.com/u/AdamCook1)\
**Post date:** [July 18, 2021, 2:37am UTC](https://community.inventables.com/t/x-carve-pro-model-for-sketchup/120262/1 "2021-07-18T02:37:19Z")

</div>

Is there a SketchUp compatible 3d model of the X-Carve Pro? It’s not essential, but would help me layout my shop more easily. 🙂

---

<div class="post-metadata">

**Author:** ![BradleyBoysen](https://avatars.discourse-cdn.com/v4/letter/b/7feea3/32.png) [@BradleyBoysen](https://community.inventables.com/u/BradleyBoysen)\
**Post date:** [July 19, 2021, 12:41pm UTC](https://community.inventables.com/t/x-carve-pro-model-for-sketchup/120262/2 "2021-07-19T12:41:29Z")

</div>

I was able to get these from customer support.

 ![image](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/6/8/68d4e6f7a238c9a9f076761e272acd4e79d28fa0.jpeg)  
 ![image](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/1/1/110a48fb48fca25275494db32d10c8be7f60132c.jpeg)  
 ![image](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/1/7/17fe4a098bd946533c1d4f8d492c4413a2dfe875.jpeg)

---

<div class="post-metadata">

**Author:** ![AdamCook1](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/adamcook1/32/87040_2.png) [@AdamCook1](https://community.inventables.com/u/AdamCook1)\
**Post date:** [July 19, 2021, 1:00pm UTC](https://community.inventables.com/t/x-carve-pro-model-for-sketchup/120262/3 "2021-07-19T13:00:07Z")

</div>

Thanks! This is helpful. I wonder if there is a 3d file available as well though.

---

<div class="post-metadata">

**Author:** ![JustinSmith3](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/justinsmith3/32/72892_2.png) [@JustinSmith3](https://community.inventables.com/u/JustinSmith3)\
**Post date:** [August 10, 2021, 3:16am UTC](https://community.inventables.com/t/x-carve-pro-model-for-sketchup/120262/4 "2021-08-10T03:16:14Z")

</div>

Thanks for the post, these dimensions are what I’ve been looking for to complete my cabinet design to enclose the support equipment.

From the drawing I’m guessing the electrical cabling goes out the back left corner of the machine? Also, is the dust collection support arm movable?

---

<div class="post-metadata">

**Author:** ![BradleyBoysen](https://avatars.discourse-cdn.com/v4/letter/b/7feea3/32.png) [@BradleyBoysen](https://community.inventables.com/u/BradleyBoysen)\
**Post date:** [August 11, 2021, 1:14pm UTC](https://community.inventables.com/t/x-carve-pro-model-for-sketchup/120262/5 "2021-08-11T13:14:45Z")

</div>

That’s correct on the controller and no the dust arm is not movable.