# X-Carve Pro 4x4, Neenah, Wisconsin $7,500

**URL:** <https://community.inventables.com/t/x-carve-pro-4x4-neenah-wisconsin-7-500/142226>\
**Category:** For Sale and Trade\
**Created:** [March 29, 2023, 3:25am UTC](https://community.inventables.com/t/x-carve-pro-4x4-neenah-wisconsin-7-500/142226 "2023-03-29T03:25:43Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![JasonGazzana](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/jasongazzana/32/83233_2.png) [@JasonGazzana](https://community.inventables.com/u/JasonGazzana)\
**Post date:** [March 29, 2023, 3:25am UTC](https://community.inventables.com/t/x-carve-pro-4x4-neenah-wisconsin-7-500/142226/1 "2023-03-29T03:25:43Z")

</div>

Interested in selling my X-Cave Pro 4x4. Don’t use it as much as I like to. I have a good size workbench too if you’re interested in that as well that I will sell for an additional $1,500.

I will include bits, tools, and an unopened box that contains an additional waste board with the later added clamp track machined into it.

Here are some photos:

 ![image0](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/c/e/cea459c4599af0c401a622b8b436abb3b54a5108.jpeg)  
 ![image1](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/8/5/851e3edca0732392c5ca382c0d82521fe3dcd794.jpeg)  
 ![image3](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/0/8/081467d2f31f8a0f99c6edb2b81b9db55d795ef0.jpeg)  
 ![image4](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/f/3/f32bc6c57db3430cae83140151f646673f9bae77.jpeg)  
 ![image5](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/5/a/5a4effc4075eaccba54ed99e171fd020ba64b476.jpeg)  
 ![image6](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/3/8/38509e9062775a9f65701c23d716ba3d65a7e352.jpeg)

---

<div class="post-metadata">

**Author:** ![JasonGazzana](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/jasongazzana/32/83233_2.png) [@JasonGazzana](https://community.inventables.com/u/JasonGazzana)\
**Post date:** [April 11, 2023, 3:02pm UTC](https://community.inventables.com/t/x-carve-pro-4x4-neenah-wisconsin-7-500/142226/2 "2023-04-11T15:02:55Z")

</div>

Would look at knocking a $1,000 off the price of the unit to $6,500. Would also throw in the workbench for only an addition $1,000, so, $7,500 for a ready to go set up! let me know if you are interested!

Thanks!  
Jason

---

<div class="post-metadata">

**Author:** ![JasonGazzana](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/jasongazzana/32/83233_2.png) [@JasonGazzana](https://community.inventables.com/u/JasonGazzana)\
**Post date:** [April 19, 2023, 11:26pm UTC](https://community.inventables.com/t/x-carve-pro-4x4-neenah-wisconsin-7-500/142226/3 "2023-04-19T23:26:53Z")

</div>

Alright last ditch effort to sell, the minimum I’ll go is $6,000, **workbench included**. This is a bargain! Let me know if you’re interested!

---

<div class="post-metadata">

**Author:** ![JasonGazzana](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/jasongazzana/32/83233_2.png) [@JasonGazzana](https://community.inventables.com/u/JasonGazzana)\
**Post date:** [April 27, 2023, 12:26am UTC](https://community.inventables.com/t/x-carve-pro-4x4-neenah-wisconsin-7-500/142226/4 "2023-04-27T00:26:20Z")

</div>

X-Carve Pro has been sold.

---

<div class="post-metadata">

**Author:** ![system](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/system/32/67217_2.png) [@system](https://community.inventables.com/u/system)\
**Post date:** [July 26, 2023, 12:26am UTC](https://community.inventables.com/t/x-carve-pro-4x4-neenah-wisconsin-7-500/142226/5 "2023-07-26T00:26:44Z")

</div>

Closed on July 26, 2023, 12:26am UTC

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.