# X-Carve for Flag building

**URL:** <https://community.inventables.com/t/x-carve-for-flag-building/139901>\
**Category:** For Sale and Trade\
**Created:** [January 25, 2023, 5:11pm UTC](https://community.inventables.com/t/x-carve-for-flag-building/139901 "2023-01-25T17:11:49Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![AngeloSamArmagno](https://avatars.discourse-cdn.com/v4/letter/a/d07c76/32.png) [@AngeloSamArmagno](https://community.inventables.com/u/AngeloSamArmagno)\
**Post date:** [January 25, 2023, 5:11pm UTC](https://community.inventables.com/t/x-carve-for-flag-building/139901/1 "2023-01-25T17:11:49Z")

</div>

Hello,  
I am a wood worker and make Wood Flags, I looking to buy a X-Carve that can accommodate a 20x37 inch wood flag for carving images.

---

<div class="post-metadata">

**Author:** ![JamesWNZ](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/jameswnz/32/82775_2.png) [@JamesWNZ](https://community.inventables.com/u/JamesWNZ)\
**Post date:** [January 25, 2023, 5:58pm UTC](https://community.inventables.com/t/x-carve-for-flag-building/139901/2 "2023-01-25T17:58:44Z")

</div>

The standard X-Carve will do 37" wide at a pinch according to this: [X-Carve – Inventables, Inc.](https://www.inventables.com/technologies/x-carve)

Also have a look at @SethCNC 's work and video here: [Cutting flag stars - #9 by SethCNC](https://community.inventables.com/t/cutting-flag-stars/121133/9)

---

<div class="post-metadata">

**Author:** ![AngeloSamArmagno](https://avatars.discourse-cdn.com/v4/letter/a/d07c76/32.png) [@AngeloSamArmagno](https://community.inventables.com/u/AngeloSamArmagno)\
**Post date:** [January 25, 2023, 6:41pm UTC](https://community.inventables.com/t/x-carve-for-flag-building/139901/3 "2023-01-25T18:41:29Z")

</div>

Thank you.

---

<div class="post-metadata">

**Author:** ![AngeloSamArmagno](https://avatars.discourse-cdn.com/v4/letter/a/d07c76/32.png) [@AngeloSamArmagno](https://community.inventables.com/u/AngeloSamArmagno)\
**Post date:** [January 25, 2023, 6:46pm UTC](https://community.inventables.com/t/x-carve-for-flag-building/139901/4 "2023-01-25T18:46:37Z")

</div>

also looking to buy a used X-Carve.

---

<div class="post-metadata">

**Author:** ![system](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/system/32/67217_2.png) [@system](https://community.inventables.com/u/system)\
**Post date:** [April 25, 2023, 6:47pm UTC](https://community.inventables.com/t/x-carve-for-flag-building/139901/5 "2023-04-25T18:47:02Z")

</div>

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.