# X-carve electronics

**URL:** <https://community.inventables.com/t/x-carve-electronics/666>\
**Category:** X-Carve\
**Created:** [March 22, 2015, 5:09am UTC](https://community.inventables.com/t/x-carve-electronics/666 "2015-03-22T05:09:32Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![Zach\_Kaplan](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/zach_kaplan/32/84268_2.png) [@Zach\_Kaplan](https://community.inventables.com/u/Zach_Kaplan)\
**Post date:** [April 23, 2015, 7:03am UTC](https://community.inventables.com/t/x-carve-electronics/666/6 "2015-04-23T07:03:33Z")

</div>

Check out the Spindle Stats thread

> [@Spindle Stats](https://community.inventables.com/t/spindle-stats/340/3):
>
> The new spindle has a standard ER-11 collet, same as our Quiet Cut Spindle. It goes up to 15,000 RPM, takes 24v, and is rated at 350 watts. We did some performance testing of it next to the Quiet Cut Spindle, let me see if I can have someone post that.

---

_[View the full topic](https://community.inventables.com/t/x-carve-electronics/666)._