# X-Carve 1000mm x 1000mm Mirrored Assembly finished!

**URL:** <https://community.inventables.com/t/x-carve-1000mm-x-1000mm-mirrored-assembly-finished/57216>\
**Category:** X-Carve\
**Created:** [June 26, 2018, 8:58pm UTC](https://community.inventables.com/t/x-carve-1000mm-x-1000mm-mirrored-assembly-finished/57216 "2018-06-26T20:58:01Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lexo](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/lexo/32/84710_2.png) [@Lexo](https://community.inventables.com/u/Lexo)\
**Post date:** [June 26, 2018, 8:58pm UTC](https://community.inventables.com/t/x-carve-1000mm-x-1000mm-mirrored-assembly-finished/57216/1 "2018-06-26T20:58:01Z")

</div>

I just finished Assembling my X-Carve 1000mm over the weekend! It took me like 23.5 hr to build with many many distractions of a baby, a dog, and uh… oh yeah a wife 😁 I was projected to wait 2 more weeks for final box but thank you Inventables for the hard work i received it early and finished the build. I was planning on building my CNC table first however when i saw the final box come in i was to eager and excited to start the building challenge 😃

I would like help on what type of table I’m going to make. the X-Carve is going in my office that I share with my wife and the floors are uneven. I plan to build the table in the corner (With X-Control box on right side of CNC) and i plan on shooting the vacuum hose underneath table and making a hole in the back wall into the exterior porch room so it will be a lot more quiet for us. I need to make sure this will not move or rack with the moving of the motors and the weight of CNC plus materials. I do plan to eventually build an enclosure on top but starting with a good level torsion box/ Table top would help me get started right away.

Plywood construction? MDF? 2x4’s? I did think about putting locking casters on it but i honestly don’t plan on moving it. leveling glides maybe. Any insight would help. I want to get it off my current old interior door on its side over saw horses.

Thanks guys!

 ![20180624_211004[1]](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/c/0/c0d37f666b2081923e698ef9cda039f6d0d2009b.jpg)  
 ![20180625_010659[1]](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/f/9/f9e95d512e398dfe45ebed858f265c85b9b851e4.jpg)

---

<div class="post-metadata">

**Author:** ![PhillipLunsford](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/philliplunsford/32/33614_2.png) [@PhillipLunsford](https://community.inventables.com/u/PhillipLunsford)\
**Post date:** [June 26, 2018, 9:37pm UTC](https://community.inventables.com/t/x-carve-1000mm-x-1000mm-mirrored-assembly-finished/57216/2 "2018-06-26T21:37:28Z")

</div>

Go to xcarve workspace showcase here on this forum. There are tons of pictures showing all kinds of ideas. Welcome to the group

---

<div class="post-metadata">

**Author:** ![Lexo](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/lexo/32/84710_2.png) [@Lexo](https://community.inventables.com/u/Lexo)\
**Post date:** [June 26, 2018, 9:42pm UTC](https://community.inventables.com/t/x-carve-1000mm-x-1000mm-mirrored-assembly-finished/57216/3 "2018-06-26T21:42:28Z")

</div>

Thanks! I didn’t see that forum.Ill check it out and hopefully build something this weekend.