# X-Axis V-Wheels and Eccentric Nuts Keep loosening

**URL:** <https://community.inventables.com/t/x-axis-v-wheels-and-eccentric-nuts-keep-loosening/14110>\
**Category:** Troubleshooting\
**Created:** [October 7, 2015, 2:13am UTC](https://community.inventables.com/t/x-axis-v-wheels-and-eccentric-nuts-keep-loosening/14110 "2015-10-07T02:13:33Z")\
**Posts on this page:** 1\
**Showing post:** 15

<div class="post-metadata">

**Author:** ![DougBornyk](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/dougbornyk/32/67639_2.png) [@DougBornyk](https://community.inventables.com/u/DougBornyk)\
**Post date:** [October 10, 2015, 10:18pm UTC](https://community.inventables.com/t/x-axis-v-wheels-and-eccentric-nuts-keep-loosening/14110/15 "2015-10-10T22:18:43Z")

</div>

I’m happy to report a successful test carve after a few adjustments; I checked and tightened the x axis belt gear (thanks Rusty) and I turned up the current a little more for the x axis, and I moved my wood 1 inch in on the x axis, zeroing an inch to the right because the far left seems a little tighter as the x axis travels there. Will tweak that when I need to. I hope to do a more complex carve tomorrow after checking things over, and we’ll see how that goes. Wow. Does it feel good to make some progress on this. Thanks for all the input from everyone

---

_[View the full topic](https://community.inventables.com/t/x-axis-v-wheels-and-eccentric-nuts-keep-loosening/14110)._