# Wtb: 500mm or 1000mm xcarve

**URL:** <https://community.inventables.com/t/wtb-500mm-or-1000mm-xcarve/25445>\
**Category:** For Sale and Trade\
**Created:** [June 28, 2016, 3:18pm UTC](https://community.inventables.com/t/wtb-500mm-or-1000mm-xcarve/25445 "2016-06-28T15:18:02Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![JarredYoungblood](https://avatars.discourse-cdn.com/v4/letter/j/a9a28c/32.png) [@JarredYoungblood](https://community.inventables.com/u/JarredYoungblood)\
**Post date:** [June 28, 2016, 3:18pm UTC](https://community.inventables.com/t/wtb-500mm-or-1000mm-xcarve/25445/1 "2016-06-28T15:18:02Z")

</div>

Hello, im looking for a 500mm or 1000mm xcarve base or modifed. Driving back from florida Wednesday to Kansas City. Can pick up along my way back. Message if you have one for sale. Thanks.

---

<div class="post-metadata">

**Author:** ![JarredYoungblood](https://avatars.discourse-cdn.com/v4/letter/j/a9a28c/32.png) [@JarredYoungblood](https://community.inventables.com/u/JarredYoungblood)\
**Post date:** [June 28, 2016, 8:47pm UTC](https://community.inventables.com/t/wtb-500mm-or-1000mm-xcarve/25445/4 "2016-06-28T20:47:51Z")

</div>

Right now in daytona, leave tomorrow @9a to nashville. Where you located, specs and about how much you looking for?

---

<div class="post-metadata">

**Author:** ![AlanDavis](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/alandavis/32/4710_2.png) [@AlanDavis](https://community.inventables.com/u/AlanDavis)\
**Post date:** [June 29, 2016, 8:58am UTC](https://community.inventables.com/t/wtb-500mm-or-1000mm-xcarve/25445/6 "2016-06-29T08:58:16Z")

</div>

You’re in wrong place.  
You may want to check following link.

> **[For Sale and Trade](https://community.inventables.com/c/for-sale-and-trade/36)**
>
> This category is for buying, selling, and trading 3D carving machines and related accessories.

---

<div class="post-metadata">

**Author:** ![JarredYoungblood](https://avatars.discourse-cdn.com/v4/letter/j/a9a28c/32.png) [@JarredYoungblood](https://community.inventables.com/u/JarredYoungblood)\
**Post date:** [June 29, 2016, 5:07pm UTC](https://community.inventables.com/t/wtb-500mm-or-1000mm-xcarve/25445/7 "2016-06-29T17:07:20Z")

</div>

Uh might recheck your post. Was this meant to go in a different thread?

---

<div class="post-metadata">

**Author:** ![AlanDavis](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/alandavis/32/4710_2.png) [@AlanDavis](https://community.inventables.com/u/AlanDavis)\
**Post date:** [June 29, 2016, 5:08pm UTC](https://community.inventables.com/t/wtb-500mm-or-1000mm-xcarve/25445/8 "2016-06-29T17:08:35Z")

</div>

Yes, just click this link.

> [@XCARVE 1000mm For Sale Southern California](https://community.inventables.com/t/xcarve-1000mm-for-sale-southern-california/14482):
>
> I have the 1000mm XCARVE for sale in Huntington Beach, CA. Used maybe 4-5 times. Completely assembled and ready to go. I just pre-ordered the GlowForge because laser will do much better for what I want than milling so the XCARVE has gotta go. It is the Fully Loaded 1000mm. Would like $1200 for it and I am firm on that. Will ship as well but prefer local pickup. If shipped I will charge exact shipping costs plus packaging costs. Will probably just take to UPS and have them package and ship it for…

---

<div class="post-metadata">

**Author:** ![JarredYoungblood](https://avatars.discourse-cdn.com/v4/letter/j/a9a28c/32.png) [@JarredYoungblood](https://community.inventables.com/u/JarredYoungblood)\
**Post date:** [June 30, 2016, 12:43am UTC](https://community.inventables.com/t/wtb-500mm-or-1000mm-xcarve/25445/9 "2016-06-30T00:43:00Z")

</div>

Uh im driving from florida not cali. Thanks for the link