# Wiring up controller for spindle and dust **URL:** \ **Category:** Upgrades\ **Created:** [November 8, 2017, 3:24pm UTC](https://community.inventables.com/t/wiring-up-controller-for-spindle-and-dust/45110 "2017-11-08T15:24:34Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![JamesAnderson](https://avatars.discourse-cdn.com/v4/letter/j/e19b73/32.png) [@JamesAnderson](https://community.inventables.com/u/JamesAnderson)\ **Post date:** [November 8, 2017, 3:24pm UTC](https://community.inventables.com/t/wiring-up-controller-for-spindle-and-dust/45110/1 "2017-11-08T15:24:34Z")
Hi everyone new guy. I was wanting to know if there is a way to wire up the spindle and dust so that the controller can turn them on and off automaticly? Any help would be appericated. ---
**Author:** ![LarryM](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/larrym/32/51450_2.png) [@LarryM](https://community.inventables.com/u/LarryM)\ **Post date:** [November 8, 2017, 4:06pm UTC](https://community.inventables.com/t/wiring-up-controller-for-spindle-and-dust/45110/2 "2017-11-08T16:06:19Z")
Search the forum for IoT relay. ---
**Author:** ![JanVanderlinden](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/janvanderlinden/32/48838_2.png) [@JanVanderlinden](https://community.inventables.com/u/JanVanderlinden)\ **Post date:** [November 9, 2017, 1:34am UTC](https://community.inventables.com/t/wiring-up-controller-for-spindle-and-dust/45110/3 "2017-11-09T01:34:46Z")
This works perfectly. > **[IoT Relay](https://dlidirect.com/products/iot-power-relay)** > > Create the Internet of Things with safe, reliable power control.   Universal control voltage 3-60VDC or 12-120VAC connects to Arduino, Raspberry Pi, PIC or other micro. Or connect directly to a 12V to 48VDC or even 120VAC circuits. High... ---
**Author:** ![StephenCook](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/stephencook/32/73911_2.png) [@StephenCook](https://community.inventables.com/u/StephenCook)\ **Post date:** [November 10, 2017, 1:39am UTC](https://community.inventables.com/t/wiring-up-controller-for-spindle-and-dust/45110/4 "2017-11-10T01:39:21Z")
I use the IoT power realy and it works nice. Just don’t overload it ---
**Author:** ![ChrisPembleton](https://avatars.discourse-cdn.com/v4/letter/c/35a633/32.png) [@ChrisPembleton](https://community.inventables.com/u/ChrisPembleton)\ **Post date:** [November 12, 2017, 5:51pm UTC](https://community.inventables.com/t/wiring-up-controller-for-spindle-and-dust/45110/5 "2017-11-12T17:51:29Z")
Look at this Facebook post. This should help you. [Xcarve CNC owners group | Facebook](https://www.facebook.com/groups/346976428975186/permalink/480707485602079/) ---
**Author:** ![BrianSaban](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/briansaban/32/84709_2.png) [@BrianSaban](https://community.inventables.com/u/BrianSaban)\ **Post date:** [November 12, 2017, 7:18pm UTC](https://community.inventables.com/t/wiring-up-controller-for-spindle-and-dust/45110/7 "2017-11-12T19:18:18Z")
Drew this up quick so a little sloppy ![di](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/e/9/e93225fd8e84e454ace644c244b61fbfabf9687d.jpg) ---
**Author:** ![ChrisPembleton](https://avatars.discourse-cdn.com/v4/letter/c/35a633/32.png) [@ChrisPembleton](https://community.inventables.com/u/ChrisPembleton)\ **Post date:** [November 12, 2017, 8:07pm UTC](https://community.inventables.com/t/wiring-up-controller-for-spindle-and-dust/45110/8 "2017-11-12T20:07:40Z")
Thanks. Didn’t even think about that. But now you all have a reason to join it. LOL ---
**Author:** ![HaldorLonningdal](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/haldorlonningdal/32/72377_2.png) [@HaldorLonningdal](https://community.inventables.com/u/HaldorLonningdal)\ **Post date:** [November 12, 2017, 10:05pm UTC](https://community.inventables.com/t/wiring-up-controller-for-spindle-and-dust/45110/9 "2017-11-12T22:05:52Z")
> [@Relay for Dewalt spindle](https://community.inventables.com/t/relay-for-dewalt-spindle/14852): > > Finally ready to install the Dewalt router that I bought forever ago. I bought this relay: [Amazon.com](http://www.amazon.com/gp/product/B00WV7GMA2) I want the auto spindle start to still work. Two questions - How do I wire it up? Is it the yellow and black wires that go in there, or the red and black ones? And which end? Which of the outlets will be controlled by the relay, and which will be live? I figure one outlet gets the router plugged into it, and another one gets the whole power supply/gshield stuff plugged into it. Which is …