Wiggle in long y axis lines

[Tarry_Brindle]

I would say for you to take the v-wheel off to inspect it…I’m thinking you might this issue:

Should V-wheels have side to side play in the bearing?

several of the V wheels on my machine have what i would call side to side play. basically the outer delrin wheel part moves side to side on the bearings. on my z axis if i pull back and forth on the spindle you can see the bearings move back and forth inside the delrin wheels. this causes some concern as it doesnt appear to be all wheels that do that but probably half the ones on my machine have this issue. taking a problem vwheel off the machine, i can easily duplicate the problem with my fing…

If that is the case, it should be an easy fix, or you could try contacting Inventables for a replacement, but that might take a little while for them to ship out.