# What in the world is this issue?

**URL:** https://community.inventables.com/t/what-in-the-world-is-this-issue/15183
**Category:** Troubleshooting
**Created:** [October 31, 2015, 7:04am UTC](https://community.inventables.com/t/what-in-the-world-is-this-issue/15183 "2015-10-31T07:04:03Z")
**Posts on this page:** 1
**Showing post:** 15

<div class="post-metadata">

### Author: ![MichaelMayerhofer](https://avatars.discourse-cdn.com/v4/letter/m/848f3c/32.png) [@MichaelMayerhofer](https://community.inventables.com/u/MichaelMayerhofer)
#### Post date: [November 8, 2015, 4:09pm UTC](https://community.inventables.com/t/what-in-the-world-is-this-issue/15183/15 "2015-11-08T16:09:24Z")

</div>

If you are using the low cost spindle, it may be an EMC issue. I had strange moves in y-direction. Have a look at [Chatter Issue - #13 by MichaelMayerhofer](https://community.inventables.com/t/chatter-issue/9754/13) and scroll down to the bottom.

---

_[View the full topic](https://community.inventables.com/t/what-in-the-world-is-this-issue/15183)._