# What happened?

**URL:** https://community.inventables.com/t/what-happened/54870
**Category:** X-Carve
**Created:** [May 1, 2018, 1:51am UTC](https://community.inventables.com/t/what-happened/54870 "2018-05-01T01:51:58Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![TaylorHamilton](https://avatars.discourse-cdn.com/v4/letter/t/839c29/32.png) [@TaylorHamilton](https://community.inventables.com/u/TaylorHamilton)
#### Post date: [May 1, 2018, 1:51am UTC](https://community.inventables.com/t/what-happened/54870/1 "2018-05-01T01:51:59Z")

</div>

[IMG\_0162.HEIC](https://cdck-file-uploads-canada1.s3.dualstack.ca-central-1.amazonaws.com/flex009/uploads/inventables/original/3X/d/9/d914da1d72e4b6e410786e248b807a71eed9d6cd.HEIC) (1.6 MB)

This is my 3rd carve. I imported optimized SVG from Inkscape and everything looked great until it started carving the outline. Its like the homing location changed just before carving the outline… When I cancelled the carve the bit went back home but a couple inches to the left of initial location.

---

<div class="post-metadata">

### Author: ![FatKatOne](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/fatkatone/32/73156_2.png) [@FatKatOne](https://community.inventables.com/u/FatKatOne)
#### Post date: [May 1, 2018, 2:03am UTC](https://community.inventables.com/t/what-happened/54870/2 "2018-05-01T02:03:26Z")

</div>

Loose pulleys or belts something is slipping

---

<div class="post-metadata">

### Author: ![TaylorHamilton](https://avatars.discourse-cdn.com/v4/letter/t/839c29/32.png) [@TaylorHamilton](https://community.inventables.com/u/TaylorHamilton)
#### Post date: [May 1, 2018, 2:28am UTC](https://community.inventables.com/t/what-happened/54870/3 "2018-05-01T02:28:40Z")

</div>

Thanks, I’ll try that.