# Weekend projects? **URL:** \ **Category:** Meta\ **Created:** [February 11, 2017, 9:52pm UTC](https://community.inventables.com/t/weekend-projects/33964 "2017-02-11T21:52:26Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Zach\_Kaplan](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/zach_kaplan/32/84268_2.png) [@Zach\_Kaplan](https://community.inventables.com/u/Zach_Kaplan)\ **Post date:** [February 11, 2017, 9:52pm UTC](https://community.inventables.com/t/weekend-projects/33964/1 "2017-02-11T21:52:26Z")
Anyone got any weekend projects they are working on? ---
**Author:** ![ErikJenkins](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/erikjenkins/32/84368_2.png) [@ErikJenkins](https://community.inventables.com/u/ErikJenkins)\ **Post date:** [February 11, 2017, 10:31pm UTC](https://community.inventables.com/t/weekend-projects/33964/2 "2017-02-11T22:31:05Z")
I did a few things with the X-Carve and J-Tech laser this morning: Business card holder etching ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/e/3/e3f8bda210912e4df73ba30f115569fa0a9a2f1a.jpg) Journal customization ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/f/b/fbb38880ec0ef8a2f5bd77ac558ac1bac76be407.jpg) Etched a bamboo cutting board ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/f/b/fbb304684c8f962cbf3dd81deb237ab1b4387c8a.jpg) ---
**Author:** ![Bill\_Leach](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/bill_leach/32/79242_2.png) [@Bill\_Leach](https://community.inventables.com/u/Bill_Leach)\ **Post date:** [February 11, 2017, 10:49pm UTC](https://community.inventables.com/t/weekend-projects/33964/3 "2017-02-11T22:49:28Z")
Hey look, I popped out another Telecaster just this morning! ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/7/a/7acea014d1dc4e20d67e60726b0529ffde188fb9.JPG) ---
**Author:** ![BrianSaban](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/briansaban/32/84709_2.png) [@BrianSaban](https://community.inventables.com/u/BrianSaban)\ **Post date:** [February 11, 2017, 11:00pm UTC](https://community.inventables.com/t/weekend-projects/33964/4 "2017-02-11T23:00:06Z")
> [@Plaster of paris, gypsum powder](https://community.inventables.com/t/plaster-of-paris-gypsum-powder/33729/16): > > Ok, decision made for the plaster block design. Here’s the video of the simulation. ---
**Author:** ![JDM](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/jdm/32/84169_2.png) [@JDM](https://community.inventables.com/u/JDM)\ **Post date:** [February 12, 2017, 1:14am UTC](https://community.inventables.com/t/weekend-projects/33964/5 "2017-02-12T01:14:06Z")
Going to bed early tonight so I can get up early and hit the ground running. Brand new tapered ball mills arrived! ---
**Author:** ![JeremySimmons](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/jeremysimmons/32/68212_2.png) [@JeremySimmons](https://community.inventables.com/u/JeremySimmons)\ **Post date:** [February 12, 2017, 2:30am UTC](https://community.inventables.com/t/weekend-projects/33964/6 "2017-02-12T02:30:20Z")
Used some glorious clip art and fonts in Easel to educate my neice’s overnight guest on why the XCarve should be in every school in america… ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/5/1/51ce0b2ca68d7559ef12ccdebe0efdb603ffc54d.JPG) This is going on right now that I got the littlest to bed. ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/1/2/126d0a43c7794b856afd17f583f3de62bff63400.jpg) This is going on soon, now that I figured out how to mount it. ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/0/0/0070b2b68e13e37af66f1aca0b97902705b1eb89.jpg) ---
**Author:** ![Rusty](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/rusty/32/72583_2.png) [@Rusty](https://community.inventables.com/u/Rusty)\ **Post date:** [February 12, 2017, 4:31am UTC](https://community.inventables.com/t/weekend-projects/33964/7 "2017-02-12T04:31:46Z")
Got a batch of puzzles to hammer out! ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/a/1/a154d00241247082c8e30a26f2cfeb696c8656d1.png) ---
**Author:** ![Zach\_Kaplan](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/zach_kaplan/32/84268_2.png) [@Zach\_Kaplan](https://community.inventables.com/u/Zach_Kaplan)\ **Post date:** [February 12, 2017, 2:02pm UTC](https://community.inventables.com/t/weekend-projects/33964/8 "2017-02-12T14:02:18Z")
Lookin’ good everyone! ---
**Author:** ![JeremySimmons](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/jeremysimmons/32/68212_2.png) [@JeremySimmons](https://community.inventables.com/u/JeremySimmons)\ **Post date:** [February 12, 2017, 2:36pm UTC](https://community.inventables.com/t/weekend-projects/33964/9 "2017-02-12T14:36:03Z")
![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/9/f/9f6dc90475a00bc9cf5f5f309e2fabfe187e06c7.JPG) ---
**Author:** ![YawString](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/yawstring/32/44278_2.png) [@YawString](https://community.inventables.com/u/YawString)\ **Post date:** [February 12, 2017, 6:05pm UTC](https://community.inventables.com/t/weekend-projects/33964/11 "2017-02-12T18:05:32Z")
Trying a couple things with VCarve Pro… ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/1/9/1922349920e8ec8ca3d9dc55eacb1e851c417ee8.jpg) ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/9/b/9b01e858fd17522abc607269caa672b46d04def4.jpg) ---
**Author:** ![FERomero](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/feromero/32/67348_2.png) [@FERomero](https://community.inventables.com/u/FERomero)\ **Post date:** [February 12, 2017, 6:46pm UTC](https://community.inventables.com/t/weekend-projects/33964/13 "2017-02-12T18:46:04Z")
Topographic map ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/e/a/ea5c1731284aec96bd9d88a9a2929285e50afd29.JPG) ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/0/f/0f9622ce85dc1ed2863dd2b7edd23008ce36ded1.JPG) ---
**Author:** ![YawString](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/yawstring/32/44278_2.png) [@YawString](https://community.inventables.com/u/YawString)\ **Post date:** [February 12, 2017, 6:52pm UTC](https://community.inventables.com/t/weekend-projects/33964/14 "2017-02-12T18:52:14Z")
Thanks for the tip, I wanted to see how it looked/felt with the deep cut. It actually adds a fairly neat contrast. I may make another with a set flat depth to compare. ---
**Author:** ![ScottW](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/scottw/32/20209_2.png) [@ScottW](https://community.inventables.com/u/ScottW)\ **Post date:** [February 12, 2017, 10:06pm UTC](https://community.inventables.com/t/weekend-projects/33964/16 "2017-02-12T22:06:51Z")
Sign for my dad’s shop ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/b/a/bad56bc74adf8e7e622a75f90ded7b07b61be3f4.jpg) ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/4/f/4fb6b806ce152e88f482bb298110a2910948e8f4.jpg) ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/9/3/9309a6b9f44f4df229fcb1cc059dd0c87144896e.jpg) ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/6/2/620a328ff80f80c1b70209e3e7ce8ce9912d8db4.jpg) ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/8/d/8d830a384e452af3185eef0274c3e37c5a1ca3d6.jpg) ---
**Author:** ![StevePrior](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/steveprior/32/72940_2.png) [@StevePrior](https://community.inventables.com/u/StevePrior)\ **Post date:** [February 13, 2017, 12:18am UTC](https://community.inventables.com/t/weekend-projects/33964/18 "2017-02-13T00:18:06Z")
A while back I designed this office footrest in Fusion 360, last weekend I decided I needed a second one. When I first designed a footrest I started with a very normal stool shape because that was what I was used to with my regular woodworking. It took a while for me to realize that I was using a CAD program and a CNC, so why in the world was I still keeping the lines straight? So I made this design a bit more funky with curves and cutouts really just to change my way of thinking. ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/6/2/626eda016b7af074be5f7515412ec267eea80b73.jpg) ---
**Author:** ![Zach\_Kaplan](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/zach_kaplan/32/84268_2.png) [@Zach\_Kaplan](https://community.inventables.com/u/Zach_Kaplan)\ **Post date:** [February 13, 2017, 12:22am UTC](https://community.inventables.com/t/weekend-projects/33964/19 "2017-02-13T00:22:23Z")
@ScottW that’s so cool. Is that a special [light guide](https://www.inventables.com/technologies/lucite-light-guide-acrylic-sheet) acrylic? ---
**Author:** ![HaldorLonningdal](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/haldorlonningdal/32/72377_2.png) [@HaldorLonningdal](https://community.inventables.com/u/HaldorLonningdal)\ **Post date:** [February 13, 2017, 7:35am UTC](https://community.inventables.com/t/weekend-projects/33964/20 "2017-02-13T07:35:51Z")
I havent got a a pic of it yet but my weekend project, while much more mundane compared to the projects posted above, was getting my rebuilt home grown cnc (v1.5) up and running plus getting it squared & dialed in 🙂 Previously my old rig (v1) was to flexible with drawer slides and 3/4" MDF gantry material and Nema17’s all around. Upgraded to Nema23’s all around and installed linear rails and it is now a bit more rigid 🙂 Previously in aluminium I could do 60 ipm / 0.004" DOC (dry) with a 1/8" bit, currently I am now at 70ipm and 0.012" DOC with same bit 😃 Speed is 15% up and DOC increased 4x. ---
**Author:** ![Zach\_Kaplan](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/zach_kaplan/32/84268_2.png) [@Zach\_Kaplan](https://community.inventables.com/u/Zach_Kaplan)\ **Post date:** [February 13, 2017, 1:47pm UTC](https://community.inventables.com/t/weekend-projects/33964/21 "2017-02-13T13:47:31Z")
sounds exciting ---
**Author:** ![plomac](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/plomac/32/67063_2.png) [@plomac](https://community.inventables.com/u/plomac)\ **Post date:** [February 13, 2017, 7:29pm UTC](https://community.inventables.com/t/weekend-projects/33964/22 "2017-02-13T19:29:31Z")
very cool - how long did it take to run that job. I had a friend asking who wanted to mill some electric guitar bodies and wanted to give him a rough estimate of actual carving time. ---
**Author:** ![ScottW](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/scottw/32/20209_2.png) [@ScottW](https://community.inventables.com/u/ScottW)\ **Post date:** [February 13, 2017, 7:43pm UTC](https://community.inventables.com/t/weekend-projects/33964/23 "2017-02-13T19:43:19Z")
Thanks! As far as I know it’s standard cast acrylic. I buy it in 4x8 sheets. ---
**Author:** ![Bill\_Leach](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/bill_leach/32/79242_2.png) [@Bill\_Leach](https://community.inventables.com/u/Bill_Leach)\ **Post date:** [February 13, 2017, 7:49pm UTC](https://community.inventables.com/t/weekend-projects/33964/24 "2017-02-13T19:49:45Z")
I think it was approximately an hourish. That guitar in the first picture has a big ol route in the back to accommodate a B bender and that route was a little over 35 minutes. Also, the forearm contour was done by hand. ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/e/3/e3ed30a7dc6e6c6623eb9ea731210e5c9f691b51.JPG) [Next page](https://community.inventables.com/t/weekend-projects/33964.md?page=2)