# Wedding sign help

**URL:** <https://community.inventables.com/t/wedding-sign-help/72863>\
**Category:** Uncategorized\
**Created:** [May 10, 2019, 2:06am UTC](https://community.inventables.com/t/wedding-sign-help/72863 "2019-05-10T02:06:26Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![DavidHumber](https://avatars.discourse-cdn.com/v4/letter/d/35a633/32.png) [@DavidHumber](https://community.inventables.com/u/DavidHumber)\
**Post date:** [May 10, 2019, 2:06am UTC](https://community.inventables.com/t/wedding-sign-help/72863/1 "2019-05-10T02:06:26Z")

</div>

just wondering if anyone out there has any helpful info on making a sign similar to the one pictured, im a newbie and was wondering if a certain type bit works best and if there is any easel tips as far as design set up goes, thanks!!

![wedding](https://yyz1.discourse-cdn.com/flex009/images/transparent.png)

---

<div class="post-metadata">

**Author:** ![ChristopherLathan](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/christopherlathan/32/35539_2.png) [@ChristopherLathan](https://community.inventables.com/u/ChristopherLathan)\
**Post date:** [May 10, 2019, 3:06am UTC](https://community.inventables.com/t/wedding-sign-help/72863/2 "2019-05-10T03:06:11Z")

</div>

looks to be MDF, so bits aren’t as crucial. the only tricky part is to make sure that all of the lettering connects, as with the "mr & mrs part. Do you have a font that you like? i’d be happy to help

---

<div class="post-metadata">

**Author:** ![mrdrfter101](https://avatars.discourse-cdn.com/v4/letter/m/4491bb/32.png) [@mrdrfter101](https://community.inventables.com/u/mrdrfter101)\
**Post date:** [May 10, 2019, 3:55am UTC](https://community.inventables.com/t/wedding-sign-help/72863/3 "2019-05-10T03:55:40Z")

</div>

Really like that also would you be able to do that in easel ?

---

<div class="post-metadata">

**Author:** ![ChristopherLathan](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/christopherlathan/32/35539_2.png) [@ChristopherLathan](https://community.inventables.com/u/ChristopherLathan)\
**Post date:** [May 10, 2019, 3:59am UTC](https://community.inventables.com/t/wedding-sign-help/72863/4 "2019-05-10T03:59:33Z")

</div>

yes, but it is faster and easier to lay out in Inkscape, plus you’d have the option of any font you have on your computer.

---

<div class="post-metadata">

**Author:** ![mrdrfter101](https://avatars.discourse-cdn.com/v4/letter/m/4491bb/32.png) [@mrdrfter101](https://community.inventables.com/u/mrdrfter101)\
**Post date:** [May 10, 2019, 4:13am UTC](https://community.inventables.com/t/wedding-sign-help/72863/5 "2019-05-10T04:13:52Z")

</div>

How much you charge to lay it out for me ?

---

<div class="post-metadata">

**Author:** ![HaldorLonningdal](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/haldorlonningdal/32/72377_2.png) [@HaldorLonningdal](https://community.inventables.com/u/HaldorLonningdal)\
**Post date:** [May 10, 2019, 6:11am UTC](https://community.inventables.com/t/wedding-sign-help/72863/6 "2019-05-10T06:11:31Z")

</div>

That looks like 2-color plastic (gold surface/black core) and is most likely laser cut (with its hazards)

I do a bit of these with CNC and a 20deg V-bit usually get the jov done. I choose to use a V-vit as it gives me a chamfered edge but aslo allow more intricate radii/corner details.

Here are two I have done:

Design about 7" wide  
 ![topp1](https://cdck-file-uploads-canada1.s3.dualstack.ca-central-1.amazonaws.com/flex009/uploads/inventables/original/3X/9/8/9825b707c164223850f82f62f9e774ed82420d3b.jpg)

Design about 5" wide  
 ![topp2](https://cdck-file-uploads-canada1.s3.dualstack.ca-central-1.amazonaws.com/flex009/uploads/inventables/original/3X/1/6/165a313e635331a01c81212de2976b342acc3454.jpg)

Type of bit will depend on what material you want to carve it in and the size of the carve. Please elaborate 🙂