# V-wheel debris guards?

**URL:** <https://community.inventables.com/t/v-wheel-debris-guards/12692>\
**Category:** Upgrades\
**Created:** [September 2, 2015, 6:47pm UTC](https://community.inventables.com/t/v-wheel-debris-guards/12692 "2015-09-02T18:47:04Z")\
**Posts on this page:** 1\
**Showing post:** 13

<div class="post-metadata">

**Author:** ![WilliamBedingfield](https://avatars.discourse-cdn.com/v4/letter/w/58956e/32.png) [@WilliamBedingfield](https://community.inventables.com/u/WilliamBedingfield)\
**Post date:** [October 18, 2015, 6:03pm UTC](https://community.inventables.com/t/v-wheel-debris-guards/12692/13 "2015-10-18T18:03:32Z")

</div>

> [@Dust Guards on Y-axis](https://community.inventables.com/t/dust-guards-on-y-axis/12964):
>
> There seemed to be an excessive amount of dust buildup on my y rails when cutting mdf especially since I upgraded to the 800w air cooled spindle , so I took some lexan I had laying around and made some dust guards so I don’t have to clean them as often.

---

_[View the full topic](https://community.inventables.com/t/v-wheel-debris-guards/12692)._