# V-Bit is getting cloged

**URL:** <https://community.inventables.com/t/v-bit-is-getting-cloged/23965>\
**Category:** X-Carve\
**Created:** [May 20, 2016, 1:36pm UTC](https://community.inventables.com/t/v-bit-is-getting-cloged/23965 "2016-05-20T13:36:39Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![AndrewWatkins](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/andrewwatkins/32/33082_2.png) [@AndrewWatkins](https://community.inventables.com/u/AndrewWatkins)\
**Post date:** [May 20, 2016, 1:36pm UTC](https://community.inventables.com/t/v-bit-is-getting-cloged/23965/1 "2016-05-20T13:36:40Z")

</div>

I’ve been using my 60 degree bit more these days but it seems to get clogged in one spot. When it gets clogged up, it leaves a groove in the channel it’s cutting and doesn’t come out smooth. Has anyone ever seen this before?