Using multiple bits at the same project

[Ebr]

With Easel check out this thread:

Two stage cuts

I couldn’t find this in the UI. Using other CAM systems it would set up to first do a rough cut with a large bit, and then go back and fix the detail with a small bit. Like if you are cutting a pocket with sharp inside corners, you would want to use a really small bit to get those corners, but not to cut out the whole pocket. So is there a way to do a rough cut followed by a detailed cut, or is this on the feature roadmap?

For tool changes between cuts learn to use G28(which is amazingly useful):

Learning About G28

Understanding G28 I hope this is appropriate to post here. Didn’t know where else to put it. Maybe would make more sense as a project? Background I am new to CNC. I have recently been using a Shapeoko then upgraded to an X-Carve. In my job I have had the fortune recently to have at my disposal a wealth of resources on the Autodesk CAM team that I have been pestering for information on my quest to learn more about using CNC machines. One of the topics that I found most confusing and cause…

Also I would recommend Fusion 360. There you can both model and create toolpaths in one application. Beware - steep learning curve!

Youtube is your friend there for learning Fusion 360 quickly.