# Using Fusion 360 with Carvey

**URL:** <https://community.inventables.com/t/using-fusion-360-with-carvey/46614>\
**Category:** Carvey\
**Created:** [December 5, 2017, 2:28pm UTC](https://community.inventables.com/t/using-fusion-360-with-carvey/46614 "2017-12-05T14:28:33Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![NeilAnderson](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/neilanderson/32/76885_2.png) [@NeilAnderson](https://community.inventables.com/u/NeilAnderson)\
**Post date:** [December 5, 2017, 2:28pm UTC](https://community.inventables.com/t/using-fusion-360-with-carvey/46614/1 "2017-12-05T14:28:34Z")

</div>

Does anyone have any good resources on how to import tool paths into Carvey from Fusion 360? More specifically, I am looking for info on things I should be aware of before running the operation. I’m relatively new to the Carvey (and CNCing in general) and would prefer not to destroy my machine before I’ve gotten my money’s worth.

There seems to be virtually nothing on this and I’d love to find more info. Any tips and tricks or guides you have would be greatly appreciated!

Thanks

---

<div class="post-metadata">

**Author:** ![TheGuru](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/theguru/32/86723_2.png) [@TheGuru](https://community.inventables.com/u/TheGuru)\
**Post date:** [December 6, 2017, 1:57am UTC](https://community.inventables.com/t/using-fusion-360-with-carvey/46614/2 "2017-12-06T01:57:01Z")

</div>

I don’t have any experience with Carvey, but I use OpenSCAM to visualize all my tool paths. You can see it in Fusion, but I like the independent 3rd party (trust but verify) rendering of the gcode.

-tom