Understanding Zeroing out the spindle

[RobertA_Rieke]

Absolutely, I put up the information and materials on this thread:

Y Axis Braces and Belt Dust Shield

I just finished bracing the Y axis and installing dust shields for the Y axis belts. Here’s the details, since I’m not sure when I will actually get this turned into a project. All feeds and speeds are for the 1000x1000mm X-Carve with the Dewalt 611 with X axis stiffened. Do not use these feeds and speeds for lesser spindles!!! I started by cutting out 6 braces from .125" aluminum T6061, using a 12"x12" piece from Inventables. I used the 1/8" 2 flute upcut ball end mill from Inventables. 6…