# Two color HDPE edge finishing?

**URL:** <https://community.inventables.com/t/two-color-hdpe-edge-finishing/74664>\
**Category:** Uncategorized\
**Created:** [June 29, 2019, 1:56am UTC](https://community.inventables.com/t/two-color-hdpe-edge-finishing/74664 "2019-06-29T01:56:48Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![JosephFusari](https://avatars.discourse-cdn.com/v4/letter/j/35a633/32.png) [@JosephFusari](https://community.inventables.com/u/JosephFusari)\
**Post date:** [June 29, 2019, 1:56am UTC](https://community.inventables.com/t/two-color-hdpe-edge-finishing/74664/1 "2019-06-29T01:56:48Z")

</div>

Looking for advice on how to finish the edges when using two color HDPE. The edges obviously have “two colors,” but I don’t necessarily want that to be seen. So I took the internet and failed to find anything similar to wood edging tape or a solution.

So does such a thing exist or am I worrying too much about too small an issue?

I have thought about cutting solid color HDPE into a picture frame (four sides) borders, but that takes time and introduces variables for error.

Any thoughts?

Joe

---

<div class="post-metadata">

**Author:** ![NeilFerreri1](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/neilferreri1/32/84403_2.png) [@NeilFerreri1](https://community.inventables.com/u/NeilFerreri1)\
**Post date:** [June 29, 2019, 2:43am UTC](https://community.inventables.com/t/two-color-hdpe-edge-finishing/74664/2 "2019-06-29T02:43:57Z")

</div>

> [@JosephFusari](#):
>
> worrying too much about too small an issue

Anytime you see that stuff, the edge layers are visible. Add a radius to make it look intentional.

---

<div class="post-metadata">

**Author:** ![JosephFusari](https://avatars.discourse-cdn.com/v4/letter/j/35a633/32.png) [@JosephFusari](https://community.inventables.com/u/JosephFusari)\
**Post date:** [June 29, 2019, 1:08pm UTC](https://community.inventables.com/t/two-color-hdpe-edge-finishing/74664/3 "2019-06-29T13:08:33Z")

</div>

Neil, thanks!
