# Trying to adjust stepper values... but

**URL:** <https://community.inventables.com/t/trying-to-adjust-stepper-values-but/71779>\
**Category:** Troubleshooting\
**Created:** [April 14, 2019, 6:17pm UTC](https://community.inventables.com/t/trying-to-adjust-stepper-values-but/71779 "2019-04-14T18:17:18Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![ChristopherLathan](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/christopherlathan/32/35539_2.png) [@ChristopherLathan](https://community.inventables.com/u/ChristopherLathan)\
**Post date:** [April 14, 2019, 6:17pm UTC](https://community.inventables.com/t/trying-to-adjust-stepper-values-but/71779/1 "2019-04-14T18:17:19Z")

</div>

as the title indicates, im trying to do my semi-regular calibration on my machine.

the problem is, when i use the machine inspector/advanced to find my current values, the pop-up is off the botom of the screen, so that i cant see or scroll down thru stepper values/grbl settings.is this a screen resolution thing?

also, im having a hard time remembering which $'s are for x,y,z steppers

---

<div class="post-metadata">

**Author:** ![AntonioSantiago](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/antoniosantiago/32/84266_2.png) [@AntonioSantiago](https://community.inventables.com/u/AntonioSantiago)\
**Post date:** [April 15, 2019, 3:43pm UTC](https://community.inventables.com/t/trying-to-adjust-stepper-values-but/71779/2 "2019-04-15T15:43:50Z")

</div>

BrianSaban  
Oct '17

Ok just checking, do you happen to have the grbl settings for the original 23‘s on the 1000  
LarryM  
Oct '17

$100=40.000 (x, step/mm)  
$101=40.000 (y, step/mm)  
$102=188.947 (z, step/mm)  
$110=8000.000 (x max rate, mm/min)  
$111=8000.000 (y max rate, mm/min)  
$112=500.000 (z max rate, mm/min)  
$120=500.000 (x accel, mm/sec^2)  
$121=500.000 (y accel, mm/sec^2)  
$122=50.000 (z accel, mm/sec^2)

Oh, and I think I was supposed to mention Blue Locktite somewhere in the last post. 😃

---

<div class="post-metadata">

**Author:** ![AntonioSantiago](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/antoniosantiago/32/84266_2.png) [@AntonioSantiago](https://community.inventables.com/u/AntonioSantiago)\
**Post date:** [April 15, 2019, 3:46pm UTC](https://community.inventables.com/t/trying-to-adjust-stepper-values-but/71779/3 "2019-04-15T15:46:49Z")

</div>

I was having the very same problem last night, got tired of it so I just grabbed another computer that I had and replaced the one that I was using with the xcarve.

I just grabbed the info above from this topic; (best upgrade ever). I hope that helps, and check out that topic, it helps alot with the settings!

---

<div class="post-metadata">

**Author:** ![RobertBeattie](https://avatars.discourse-cdn.com/v4/letter/r/a587f6/32.png) [@RobertBeattie](https://community.inventables.com/u/RobertBeattie)\
**Post date:** [April 15, 2019, 6:11pm UTC](https://community.inventables.com/t/trying-to-adjust-stepper-values-but/71779/4 "2019-04-15T18:11:33Z")

</div>

Sounds like some sort of issue with the website or your browser.

Did you check it in another browser?

Did you try screen zoom (ctrl+shift+plus / ctrl+shift+minus)?

Did you try rebooting your computer?