# Touchscreen Controller

**URL:** <https://community.inventables.com/t/touchscreen-controller/161527>\
**Category:** X-Carve Pro\
**Created:** [February 7, 2026, 4:00pm UTC](https://community.inventables.com/t/touchscreen-controller/161527 "2026-02-07T16:00:04Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![RiverEdge](https://avatars.discourse-cdn.com/v4/letter/r/9e8a1a/32.png) [@RiverEdge](https://community.inventables.com/u/RiverEdge)\
**Post date:** [February 7, 2026, 4:00pm UTC](https://community.inventables.com/t/touchscreen-controller/161527/1 "2026-02-07T16:00:05Z")

</div>

This may be an Easel question, but does Inventables have a Touchscreen capable PC controller that they recommend ? Has anyone used a Apple iPad or other Tablet type PC to work with the X-Carve Pro?

---

<div class="post-metadata">

**Author:** ![DouglasPauls](https://avatars.discourse-cdn.com/v4/letter/d/7993a0/32.png) [@DouglasPauls](https://community.inventables.com/u/DouglasPauls)\
**Post date:** [February 17, 2026, 5:34pm UTC](https://community.inventables.com/t/touchscreen-controller/161527/2 "2026-02-17T17:34:51Z")

</div>

Good morning RiverEdge,

I use a Microsoft Surface Pro 6 to run my X-Carve setup. It worked well with both Easel and the Vectric VCarve Pro I now use. I just had to change the power management settings so that the screen did not timeout when plugged in. If the tablet goes to sleep, the program stops.  
Doug Pauls

---

<div class="post-metadata">

**Author:** ![RiverEdge](https://avatars.discourse-cdn.com/v4/letter/r/9e8a1a/32.png) [@RiverEdge](https://community.inventables.com/u/RiverEdge)\
**Post date:** [February 18, 2026, 11:37pm UTC](https://community.inventables.com/t/touchscreen-controller/161527/3 "2026-02-18T23:37:15Z")

</div>

Thanks Doug

Appreciate the response - we were looking at the MS Surface, so think we will give it a try.

---

<div class="post-metadata">

**Author:** ![system](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/system/32/67217_2.png) [@system](https://community.inventables.com/u/system)\
**Post date:** [May 19, 2026, 11:37pm UTC](https://community.inventables.com/t/touchscreen-controller/161527/4 "2026-05-19T23:37:49Z")

</div>

Closed on May 19, 2026, 11:37pm UTC

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.