# TILING feature not required

**URL:** <https://community.inventables.com/t/tiling-feature-not-required/140835>\
**Category:** Uncategorized\
**Created:** [February 18, 2023, 1:16am UTC](https://community.inventables.com/t/tiling-feature-not-required/140835 "2023-02-18T01:16:02Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![IanRoberts](https://avatars.discourse-cdn.com/v4/letter/i/e0b2c6/32.png) [@IanRoberts](https://community.inventables.com/u/IanRoberts)\
**Post date:** [February 18, 2023, 1:16am UTC](https://community.inventables.com/t/tiling-feature-not-required/140835/1 "2023-02-18T01:16:02Z")

</div>

How do I disable the tiling feature when it not needed.

---

<div class="post-metadata">

**Author:** ![SethCNC](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/sethcnc/32/87515_2.png) [@SethCNC](https://community.inventables.com/u/SethCNC)\
**Post date:** [February 18, 2023, 8:46pm UTC](https://community.inventables.com/t/tiling-feature-not-required/140835/2 "2023-02-18T20:46:31Z")

</div>

Go into machine\> edit machine and update your work area.  
If the workpiece size is over the work area size then itll automatically turn on tiling…  
You can also turn off tiling by clicking the material dimemsion at the top right and toggle it off in there, but it shouldnt be on if the work area is set right and workpiece size is set within the workarea peramameters.

---

<div class="post-metadata">

**Author:** ![system](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/system/32/67217_2.png) [@system](https://community.inventables.com/u/system)\
**Post date:** [May 19, 2023, 8:47pm UTC](https://community.inventables.com/t/tiling-feature-not-required/140835/3 "2023-05-19T20:47:19Z")

</div>

Closed on May 19, 2023, 8:47pm UTC

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.