# There is shift in my job

**URL:** <https://community.inventables.com/t/there-is-shift-in-my-job/14801>\
**Category:** Uncategorized\
**Created:** [October 22, 2015, 12:37pm UTC](https://community.inventables.com/t/there-is-shift-in-my-job/14801 "2015-10-22T12:37:11Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![JamalAlabbood](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/jamalalabbood/32/71003_2.png) [@JamalAlabbood](https://community.inventables.com/u/JamalAlabbood)\
**Post date:** [October 22, 2015, 12:37pm UTC](https://community.inventables.com/t/there-is-shift-in-my-job/14801/1 "2015-10-22T12:37:11Z")

</div>

I have problems in my cnc, if I want to carve circle, it is starting good , but after many steps the bit stick in the material, and changing the bath, and damage the circle, I see when I start spindle, the z axis move small steps, and the green led flicking, this happens with easel, I try to change to vcarve and see what happens.

---

<div class="post-metadata">

**Author:** ![GeoffSteer](https://avatars.discourse-cdn.com/v4/letter/g/7c8e57/32.png) [@GeoffSteer](https://community.inventables.com/u/GeoffSteer)\
**Post date:** [October 22, 2015, 12:49pm UTC](https://community.inventables.com/t/there-is-shift-in-my-job/14801/2 "2015-10-22T12:49:12Z")

</div>

Bath?

---

<div class="post-metadata">

**Author:** ![AlanDavis](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/alandavis/32/4710_2.png) [@AlanDavis](https://community.inventables.com/u/AlanDavis)\
**Post date:** [October 22, 2015, 6:17pm UTC](https://community.inventables.com/t/there-is-shift-in-my-job/14801/3 "2015-10-22T18:17:14Z")

</div>

You’ve got bad spindle. Call Inventables, they will cover you.