# The work station **URL:** \ **Category:** X-Carve\ **Created:** [April 17, 2016, 1:57pm UTC](https://community.inventables.com/t/the-work-station/22589 "2016-04-17T13:57:39Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![ChrisD](https://avatars.discourse-cdn.com/v4/letter/c/eada6e/32.png) [@ChrisD](https://community.inventables.com/u/ChrisD)\ **Post date:** [April 17, 2016, 1:57pm UTC](https://community.inventables.com/t/the-work-station/22589/1 "2016-04-17T13:57:39Z")
Here is a small quick video with no sound of the awesome X=Carve working and the work bench i made for it and my set up. Ill add more pics as i get the cable management finished as it is only partially done. The top surface is for building and assembly and the beer holder. The lower section is all X-Carve. The PSU is mounted to the side and i have a bucket vac on hangers in the back. It works OK but will work better once i add a dust shoe. [Small Youtube Video](https://youtu.be/BQV4aVMC_uM) ---
**Author:** ![DarrylKegg](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/darrylkegg/32/84315_2.png) [@DarrylKegg](https://community.inventables.com/u/DarrylKegg)\ **Post date:** [April 17, 2016, 2:51pm UTC](https://community.inventables.com/t/the-work-station/22589/2 "2016-04-17T14:51:38Z")
Would you be willing to share the project file, I was actually thinking about carving my own warning sign just this morning and id love to see how you set it up. Assuming you used easel? ---
**Author:** ![ChrisD](https://avatars.discourse-cdn.com/v4/letter/c/eada6e/32.png) [@ChrisD](https://community.inventables.com/u/ChrisD)\ **Post date:** [April 17, 2016, 3:39pm UTC](https://community.inventables.com/t/the-work-station/22589/3 "2016-04-17T15:39:28Z")
Absolutely. Not sure exactly how to download the file but i managed to get a link through easel LOL > **[genius](https://easel.inventables.com/projects/eg2vxYNUwY07duAQFmVBRQ)** > > by chris d Im a week into learning this stuff so there may be an easier way to do it then I did. I used a 1/16 bit and carved the sign first. then deleted the wording and changed bits to a 1/4 and cut the sign out from the stock. It took just about 3 hours to carve using the default speeds. The wife asked to paint it so now its on her bench for the final touch.