# The best keyhole bit money can buy!

**URL:** <https://community.inventables.com/t/the-best-keyhole-bit-money-can-buy/32731>\
**Category:** Projects\
**Created:** [January 12, 2017, 12:04am UTC](https://community.inventables.com/t/the-best-keyhole-bit-money-can-buy/32731 "2017-01-12T00:04:31Z")\
**Posts on this page:** 1\
**Showing post:** 35

<div class="post-metadata">

**Author:** ![ErikJenkins](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/erikjenkins/32/84368_2.png) [@ErikJenkins](https://community.inventables.com/u/ErikJenkins)\
**Post date:** [January 12, 2017, 4:07am UTC](https://community.inventables.com/t/the-best-keyhole-bit-money-can-buy/32731/35 "2017-01-12T04:07:36Z")

</div>

Here is the thread, but I will post my code tomorrow evening…too late to go out to the shop 🙂

> [@Keyhole Slot G Code](https://community.inventables.com/t/keyhole-slot-g-code/15616):
>
> Don’t know if this will be helpful, but I searched all over for a way to cut t-hole slots for hanging pictures and frames. It needs to plunge to a quarter of an inch, and then nibble forward, back up, nibble forward, back up, etc. This is if you don’t want the hassle of first cutting a quarter inch pocket, then following up with the keyhole bit. This code is for 1/8" depth of cut slot cutters. The bottom of the cut is only .25" deep so this is safe for .5" material. This code slows the plun…

---

_[View the full topic](https://community.inventables.com/t/the-best-keyhole-bit-money-can-buy/32731)._