# T slot nut **URL:** \ **Category:** Uncategorized\ **Created:** [December 4, 2015, 12:47pm UTC](https://community.inventables.com/t/t-slot-nut/16865 "2015-12-04T12:47:32Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![Kasba](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/kasba/32/72939_2.png) [@Kasba](https://community.inventables.com/u/Kasba)\ **Post date:** [December 4, 2015, 12:47pm UTC](https://community.inventables.com/t/t-slot-nut/16865/1 "2015-12-04T12:47:32Z")
I was wondering if someone could give me the dimensions of 5mm t slot nuts? I can’t get 5 mm where I live in Canada so Iam going to go with 1/4 20 but there is about 10 different sizes available. ---
**Author:** ![WillAdams](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/willadams/32/67263_2.png) [@WillAdams](https://community.inventables.com/u/WillAdams)\ **Post date:** [December 4, 2015, 1:57pm UTC](https://community.inventables.com/t/t-slot-nut/16865/2 "2015-12-04T13:57:04Z")
There’s a CAD file on the product page: [https://www.inventables.com/technologies/pre-assembly-t-slot-nuts](https://www.inventables.com/technologies/pre-assembly-t-slot-nuts) [https://www.inventables.com/technologies/pre-assembly-t-slot-nuts#file-attachment-disclaimer](https://www.inventables.com/technologies/pre-assembly-t-slot-nuts#file-attachment-disclaimer) ---
**Author:** ![CristianHinz](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/cristianhinz/32/45128_2.png) [@CristianHinz](https://community.inventables.com/u/CristianHinz)\ **Post date:** [December 5, 2015, 9:33am UTC](https://community.inventables.com/t/t-slot-nut/16865/3 "2015-12-05T09:33:22Z")
I ordered tons of them from Misumi, quite quick to arrive too! If by off chance you’re in Vancouver i can spare some. If you want to order some i can give you the exact part number. ---
**Author:** ![Kasba](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/kasba/32/72939_2.png) [@Kasba](https://community.inventables.com/u/Kasba)\ **Post date:** [December 5, 2015, 12:38pm UTC](https://community.inventables.com/t/t-slot-nut/16865/4 "2015-12-05T12:38:23Z")
Thanks Cristian for the offer, would you mind measuring one for me? I have everything now in 1/4 just have to get the right size for the t-slot nuts. ---
**Author:** ![CristianHinz](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/cristianhinz/32/45128_2.png) [@CristianHinz](https://community.inventables.com/u/CristianHinz)\ **Post date:** [December 6, 2015, 8:36am UTC](https://community.inventables.com/t/t-slot-nut/16865/5 "2015-12-06T08:36:28Z")
@Kasba the ones that came with the x-carve are 10mm x 15mm x 1.5mm; the ones i bought from Misumi are actually shaped like the extrusion slot and are 10mm x 10mm x 4mm Here’s a photo (left x-carve, right Misumi): ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/2X/8/8206f4b63f1ff73561b36c42e6f31ae119bbecc4.jpg) ---
**Author:** ![Kasba](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/kasba/32/72939_2.png) [@Kasba](https://community.inventables.com/u/Kasba)\ **Post date:** [December 6, 2015, 12:51pm UTC](https://community.inventables.com/t/t-slot-nut/16865/6 "2015-12-06T12:51:24Z")
Thanks much appreciated Cristian. ---
**Author:** ![MichaelGrigg](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/michaelgrigg/32/12420_2.png) [@MichaelGrigg](https://community.inventables.com/u/MichaelGrigg)\ **Post date:** [December 6, 2015, 3:09pm UTC](https://community.inventables.com/t/t-slot-nut/16865/7 "2015-12-06T15:09:20Z")
I also purchased extra hardware from misumi. I received the same Tslot nuts that INVENTABLES sells. Aka the one on the left in the photo above. So I assume Misumi sells more than one style. Size is the important factor. ---
**Author:** ![CDD](https://avatars.discourse-cdn.com/v4/letter/c/f6c823/32.png) [@CDD](https://community.inventables.com/u/CDD)\ **Post date:** [January 12, 2021, 11:43pm UTC](https://community.inventables.com/t/t-slot-nut/16865/8 "2021-01-12T23:43:20Z")
> **[Amazon.com: TOPINSTOCK 20x20 European Aluminum Extrusions Slim T-Nut M5 Thread...](https://www.amazon.com/TOPINSTOCK-European-Aluminum-Extrusions-Thread/dp/B01FOC6A8E)** > > Amazon.com: TOPINSTOCK 20x20 European Aluminum Extrusions Slim T-Nut M5 Thread Pack of 100 : Industrial & Scientific Would these work for post assembly in the excarve? trying to find away from the shipping cost. I want to use these, the bolts and the workspace angle brackets to mount to the table. much like in the picture. If i can find the angle brackets as well. Or if anyone else has an idea. ![table mount](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/9/a/9a17bb88fa3bc96b5c82a091a77cc9261ab685b7.jpeg) ---
**Author:** ![RussellCrawford](https://avatars.discourse-cdn.com/v4/letter/r/958977/32.png) [@RussellCrawford](https://community.inventables.com/u/RussellCrawford)\ **Post date:** [January 13, 2021, 2:28pm UTC](https://community.inventables.com/t/t-slot-nut/16865/9 "2021-01-13T14:28:24Z")
Yes those will work, I bought some and used them. I also bought the corner brackets > **[Amazon.com: PZRT 2020 Series Aluminum Profile Connector Set, 20pcs Corner...](https://www.amazon.com/PZRT-Aluminum-Profile-Connector-Accessories/dp/B076D76YDD)** > > Shop Amazon for PZRT 2020 Series Aluminum Profile Connector Set, 20pcs Corner Bracket,40pcs T-Slot Nuts, 40pcs M5x8 mm Hex Socket Cap Screw Bolt for 6mm Slot Aluminum Profile Accessories and find millions of items, delivered faster than ever. Russell ---
**Author:** ![CDD](https://avatars.discourse-cdn.com/v4/letter/c/f6c823/32.png) [@CDD](https://community.inventables.com/u/CDD)\ **Post date:** [January 13, 2021, 4:28pm UTC](https://community.inventables.com/t/t-slot-nut/16865/10 "2021-01-13T16:28:13Z")
Thanks @russellcrawford ---
**Author:** ![CDD](https://avatars.discourse-cdn.com/v4/letter/c/f6c823/32.png) [@CDD](https://community.inventables.com/u/CDD)\ **Post date:** [January 13, 2021, 4:30pm UTC](https://community.inventables.com/t/t-slot-nut/16865/11 "2021-01-13T16:30:42Z")
Sorry hit the wrong button, @RussellCrawford on another note, what do you use to shine up epoxy inlay after the fine grit sanding? @PhillipLunsford suggeted headlight polish, I have not used any of that before, was wondering if maybe a rubbing compound or car wax would work and if there will be any issues by using any products that will effect the way the poly goes on? ---
**Author:** ![RussellCrawford](https://avatars.discourse-cdn.com/v4/letter/r/958977/32.png) [@RussellCrawford](https://community.inventables.com/u/RussellCrawford)\ **Post date:** [January 13, 2021, 6:54pm UTC](https://community.inventables.com/t/t-slot-nut/16865/12 "2021-01-13T18:54:19Z")
I can not help you with that. I have done very little epoxy work. But headlight polish and compound are basically the same thing. I’m sure if @PhillipLunsford suggested it then he has used it and it works. Good Luck Russell