T Slot Bed

[TonyNo]

Looks like this old one…

New aluminum t slot bed

So I am making good progress on upgrading my 500m X carve with an aluminum t slot bed. Hopefully this might help anyone considering using the same extrusions. I used two of the Misumi 250mm extrusions cut at the supplier to 500mm lengths. They came with a slight warp to them, but that seems to go away when they are bolted down to a 20x20 extrusion. @JohnScherer recommended drilling through the Misumi extrusion to bolt it to the 20x20, but unfortunately, my mini milling, drilling, lathe setu…