# Squaring & Calibration Logbook

**URL:** <https://community.inventables.com/t/squaring-calibration-logbook/13064>\
**Category:** Troubleshooting\
**Created:** [September 12, 2015, 3:50am UTC](https://community.inventables.com/t/squaring-calibration-logbook/13064 "2015-09-12T03:50:40Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![RobertA\_Rieke](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/roberta_rieke/32/32723_2.png) [@RobertA\_Rieke](https://community.inventables.com/u/RobertA_Rieke)\
**Post date:** [September 12, 2015, 11:09pm UTC](https://community.inventables.com/t/squaring-calibration-logbook/13064/9 "2015-09-12T23:09:14Z")

</div>

@RichardRemski, you can calibrate the steppers in Easel. Check out this forum page: [Z axis not accurate](https://community.inventables.com/t/z-axis-not-accurate/11414/1)

There’s a link to the procedure to calibrate X and Y on there, and I’ve got the procedure for how to adjust the settings in Easel a little farther down.

---

_[View the full topic](https://community.inventables.com/t/squaring-calibration-logbook/13064)._