# Spindle will not run

**URL:** <https://community.inventables.com/t/spindle-will-not-run/151270>\
**Category:** X-Carve Pro\
**Created:** [January 27, 2024, 8:22pm UTC](https://community.inventables.com/t/spindle-will-not-run/151270 "2024-01-27T20:22:53Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![BobBerrio](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/bobberrio/32/85009_2.png) [@BobBerrio](https://community.inventables.com/u/BobBerrio)\
**Post date:** [January 27, 2024, 8:22pm UTC](https://community.inventables.com/t/spindle-will-not-run/151270/1 "2024-01-27T20:22:53Z")

</div>

Just bought new X carve pro machine. Spindle not running when selecting spindle to run. Is there a reset?

---

<div class="post-metadata">

**Author:** ![BobBerrio](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/bobberrio/32/85009_2.png) [@BobBerrio](https://community.inventables.com/u/BobBerrio)\
**Post date:** [January 28, 2024, 6:02pm UTC](https://community.inventables.com/t/spindle-will-not-run/151270/2 "2024-01-28T18:02:09Z")

</div>

I solved my issue. Complete Power reset

---

<div class="post-metadata">

**Author:** ![system](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/system/32/67217_2.png) [@system](https://community.inventables.com/u/system)\
**Post date:** [April 27, 2024, 6:02pm UTC](https://community.inventables.com/t/spindle-will-not-run/151270/3 "2024-04-27T18:02:34Z")

</div>

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.