# SOLD: X-Carve 750mm with J-tech Laser

**URL:** <https://community.inventables.com/t/sold-x-carve-750mm-with-j-tech-laser/75083>\
**Category:** For Sale and Trade\
**Created:** [July 12, 2019, 5:36am UTC](https://community.inventables.com/t/sold-x-carve-750mm-with-j-tech-laser/75083 "2019-07-12T05:36:34Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ev1](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/ev1/32/63332_2.png) [@Ev1](https://community.inventables.com/u/Ev1)\
**Post date:** [July 12, 2019, 5:36am UTC](https://community.inventables.com/t/sold-x-carve-750mm-with-j-tech-laser/75083/1 "2019-07-12T05:36:34Z")

</div>

Hi,  
I’m selling my X-Carve 750mm.  
It has seen very little use, and i have lots of extras with it. I have a laser kit, that i have not hooked up, so its’ all still in box. I don’t have the space for it, so it needs to go.

It is Located near Nanaimo BC, can meet on the Island.

$2000 CDN

+X-Carve 750 with Controller  
+J-tech 3.8W Laser Kit (Value 700CDN)  
+Desktop Windows Tower Computer to Run the System will also be included. Its an older AMD 8gb Ram Gaming computer that runs the G-code sender and software well.

Comes with:  
-Controller,  
-NEMA 23 motors,  
-Homing Switches,  
-Z-Probe,  
-DeWalt 611 Spindle,  
-Lots of Engraving Bits,  
-J-tech Laser 3.8W with Driver Kit  
-Laser Protective Glass

---

<div class="post-metadata">

**Author:** ![RyanMeyer1](https://avatars.discourse-cdn.com/v4/letter/r/e0b2c6/32.png) [@RyanMeyer1](https://community.inventables.com/u/RyanMeyer1)\
**Post date:** [August 13, 2019, 6:37am UTC](https://community.inventables.com/t/sold-x-carve-750mm-with-j-tech-laser/75083/2 "2019-08-13T06:37:42Z")

</div>

Do you have any pictures of the setup?

Is this the original or the XC 2?

Thanks!

---

<div class="post-metadata">

**Author:** ![Ev1](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/ev1/32/63332_2.png) [@Ev1](https://community.inventables.com/u/Ev1)\
**Post date:** [August 13, 2019, 3:48pm UTC](https://community.inventables.com/t/sold-x-carve-750mm-with-j-tech-laser/75083/3 "2019-08-13T15:48:48Z")

</div>

Hi Ryan,  
I got it in 2017. So i think its an original. It was the newer one at the time. The laser is all in original packaging. There are more dremel bits and extas not in the photo.

 ![91A2E020-EC7C-4AE9-890D-4A1365DBD1EB](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/7/a/7a60a49a70c9aa3ac15b67d2318cdf2e685e9d7e.jpeg) ![40EE1241-2763-4613-9E61-BCF238841DD9](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/0/b/0b24b2b99819715b379ec7f2251d2ea8b8cadbd8.jpeg) ![9E1621E5-5EE1-4565-9446-D722356FFAF7](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/2/2/227a649629e85a499aaaf07cc32f1236543852ac.jpeg) ![image](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/e/e/eecd5bd87f0e09413c9f56febd918c8de8afb3ae.jpg)

---

<div class="post-metadata">

**Author:** ![Scott7](https://avatars.discourse-cdn.com/v4/letter/s/71e660/32.png) [@Scott7](https://community.inventables.com/u/Scott7)\
**Post date:** [August 23, 2019, 1:33am UTC](https://community.inventables.com/t/sold-x-carve-750mm-with-j-tech-laser/75083/4 "2019-08-23T01:33:44Z")

</div>

hey is this still available?

---

<div class="post-metadata">

**Author:** ![JessieFritz](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/jessiefritz/32/68787_2.png) [@JessieFritz](https://community.inventables.com/u/JessieFritz)\
**Post date:** [August 23, 2019, 2:47pm UTC](https://community.inventables.com/t/sold-x-carve-750mm-with-j-tech-laser/75083/5 "2019-08-23T14:47:01Z")

</div>

Closed on August 23, 2019, 2:47pm UTC