# \[Sold\] 1000mm X-Carve for sale, Kansas City, $1200 **URL:** \ **Category:** For Sale and Trade\ **Created:** [July 3, 2018, 8:18pm UTC](https://community.inventables.com/t/sold-1000mm-x-carve-for-sale-kansas-city-1200/57475 "2018-07-03T20:18:05Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![DaveBanks](https://avatars.discourse-cdn.com/v4/letter/d/f0a364/32.png) [@DaveBanks](https://community.inventables.com/u/DaveBanks)\ **Post date:** [July 3, 2018, 8:18pm UTC](https://community.inventables.com/t/sold-1000mm-x-carve-for-sale-kansas-city-1200/57475/1 "2018-07-03T20:18:05Z")
Assembled and working 1000x1000mm X-Carve, originally purchased in November 2016, very limited use. Local pickup only in Kansas City. Includes: X-Carve NEMA 23 1000mm Motor Kit X-Carve 1000mm Rail Kit X-Carve X-Controller Kit X-Carve 110V DeWalt 611 Spindle and Mount X-Carve 1000mm Waste Board Kit X-Carve 1000mm Side Board Kit X-Carve 1000mm Drag Chain Kit X-Carve 1000mm Homing Switch Kit X-Carve Z-Probe X-Carve Toolkit X-Carve Clamp Set (note: one additional small clamp base to what is shown in photo. It had fallen to the floor when I took the photo and I missed it until later.) Collet Adapter - 30662-01 Bits - (as shown in third image, plus one additional 1/16 upcut, currently in router) Suck It dust boot (still in packaging) ![X1](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/f/b/fbaaa10e9b3077d352b702596f50972deeea970b.jpg) ![X2](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/b/1/b14e9bac02bae013f12bc5f076fd5245aef5020e.jpg) ![X3](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/b/4/b4263f8e503512e5e51fdb50a7fb7fbbe7006dbc.jpg) ![X4](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/7/9/790e2500050527be75e058cf6615829f884c8147.jpg) ---
**Author:** ![DaveBanks](https://avatars.discourse-cdn.com/v4/letter/d/f0a364/32.png) [@DaveBanks](https://community.inventables.com/u/DaveBanks)\ **Post date:** [July 4, 2018, 6:44pm UTC](https://community.inventables.com/t/sold-1000mm-x-carve-for-sale-kansas-city-1200/57475/2 "2018-07-04T18:44:20Z")
I will be traveling to mid-Missouri in the middle of July and driving to Indianapolis at the end of the month. If you are on either of these routes I can work out delivery. ---
**Author:** ![MichaelEzell](https://avatars.discourse-cdn.com/v4/letter/m/ea666f/32.png) [@MichaelEzell](https://community.inventables.com/u/MichaelEzell)\ **Post date:** [July 5, 2018, 5:10pm UTC](https://community.inventables.com/t/sold-1000mm-x-carve-for-sale-kansas-city-1200/57475/3 "2018-07-05T17:10:22Z")
Is this item still for sale? Does it come with any software? ---
**Author:** ![DaveBanks](https://avatars.discourse-cdn.com/v4/letter/d/f0a364/32.png) [@DaveBanks](https://community.inventables.com/u/DaveBanks)\ **Post date:** [July 5, 2018, 5:41pm UTC](https://community.inventables.com/t/sold-1000mm-x-carve-for-sale-kansas-city-1200/57475/4 "2018-07-05T17:41:14Z")
Yes. Still available, no software. I just used Easel. ---
**Author:** ![MichaelEzell](https://avatars.discourse-cdn.com/v4/letter/m/ea666f/32.png) [@MichaelEzell](https://community.inventables.com/u/MichaelEzell)\ **Post date:** [July 5, 2018, 6:24pm UTC](https://community.inventables.com/t/sold-1000mm-x-carve-for-sale-kansas-city-1200/57475/5 "2018-07-05T18:24:02Z")
Will you take $1,000 for it? ---
**Author:** ![DaveBanks](https://avatars.discourse-cdn.com/v4/letter/d/f0a364/32.png) [@DaveBanks](https://community.inventables.com/u/DaveBanks)\ **Post date:** [July 5, 2018, 10:59pm UTC](https://community.inventables.com/t/sold-1000mm-x-carve-for-sale-kansas-city-1200/57475/6 "2018-07-05T22:59:36Z")
Your email address? ---
**Author:** ![MichaelEzell](https://avatars.discourse-cdn.com/v4/letter/m/ea666f/32.png) [@MichaelEzell](https://community.inventables.com/u/MichaelEzell)\ **Post date:** [July 5, 2018, 11:01pm UTC](https://community.inventables.com/t/sold-1000mm-x-carve-for-sale-kansas-city-1200/57475/7 "2018-07-05T23:01:35Z")
[E\_michael\_@hotmail.com](mailto:E_michael_@hotmail.com)