# Sign for a friend

**URL:** <https://community.inventables.com/t/sign-for-a-friend/52648>\
**Category:** Projects\
**Created:** [March 16, 2018, 5:22pm UTC](https://community.inventables.com/t/sign-for-a-friend/52648 "2018-03-16T17:22:49Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Traxxtar](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/traxxtar/32/67235_2.png) [@Traxxtar](https://community.inventables.com/u/Traxxtar)\
**Post date:** [March 16, 2018, 5:22pm UTC](https://community.inventables.com/t/sign-for-a-friend/52648/1 "2018-03-16T17:22:49Z")

</div>

A small sign I made.

Carved with Easel Pro, 60\* v-bit, 3/4" maple.  
After carving, spray painted entire surface with Rust-oleum Metallic Gold.  
Hand-painted flowers/leaves with red/green paint with small brush.  
Sanded entire surface down to remove surface paint. Chamfered edges on table saw.  
Spray painted surface with clear satin polyurethane. Super easy. I think it turned out nice.

 ![IMG_6248](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/2/7/27e25f53aa910e675e033f73a7aac78aa41afda7.jpg)

---

<div class="post-metadata">

**Author:** ![WayneHall](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/waynehall/32/84646_2.png) [@WayneHall](https://community.inventables.com/u/WayneHall)\
**Post date:** [March 16, 2018, 5:33pm UTC](https://community.inventables.com/t/sign-for-a-friend/52648/2 "2018-03-16T17:33:44Z")

</div>

Looks like a very nice job.