# Should I buy these bits **URL:** \ **Category:** Uncategorized\ **Created:** [January 16, 2018, 5:57pm UTC](https://community.inventables.com/t/should-i-buy-these-bits/49043 "2018-01-16T17:57:48Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![AlanLennon](https://avatars.discourse-cdn.com/v4/letter/a/cc9497/32.png) [@AlanLennon](https://community.inventables.com/u/AlanLennon)\ **Post date:** [January 16, 2018, 5:57pm UTC](https://community.inventables.com/t/should-i-buy-these-bits/49043/1 "2018-01-16T17:57:49Z")
I have a gift card left ovrer from christmas and was going to get a few bits from Drillman 1 with it. I have these in my shopping cart so far ![20180116_161957](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/e/a/ea5f933aa8a1718c8940bebacf5e7a78168e8030.jpg) I have done a good bit of searching with the search function and got some advise already in regards to 1/16 bits and getting tapered one. But I cant find any on Drillman1 page,I want to be able to cut through 6/12 and 18mm mdf with them so I opted for long reach 1/16th’s My question is , would you go for different bits than the ones I have in my cart in the photo above? The list of bits I have so far are 2 x 1/8 fishtail down cut 2 x 1/8 straigh cut 2 x 1/8 fishtail up cut 10 x ball nose up cut 9 x 2mm ball nose up cut 1 x 3.2 mm stubby straight cut 1 x 6.1mm straight cut 1 x 10.35mm straight cut 1 x 90° v bit 1 x 60° v bit 6mm shank(no collet) 10 x 20° v bit Would the bits in my cart be a good addition to these or would you recommend anything else? Most of the links I found in the search are fot [amazon.us](http://amazon.us) and don’t deliver to Ireland. ---
**Author:** ![AllenMassey](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/allenmassey/32/84441_2.png) [@AllenMassey](https://community.inventables.com/u/AllenMassey)\ **Post date:** [January 16, 2018, 6:02pm UTC](https://community.inventables.com/t/should-i-buy-these-bits/49043/2 "2018-01-16T18:02:56Z")
If you really want a long 1/16 bit, I suggest you get lots of them because they will break quickly. ---
**Author:** ![AlanLennon](https://avatars.discourse-cdn.com/v4/letter/a/cc9497/32.png) [@AlanLennon](https://community.inventables.com/u/AlanLennon)\ **Post date:** [January 16, 2018, 6:30pm UTC](https://community.inventables.com/t/should-i-buy-these-bits/49043/3 "2018-01-16T18:30:11Z")
I know lol . Thats why I got a pack of 5. I broke my only one before I even got to use it ha. I cannot find the tapered ones you suggested to me before:(☹ ---
**Author:** ![AllenMassey](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/allenmassey/32/84441_2.png) [@AllenMassey](https://community.inventables.com/u/AllenMassey)\ **Post date:** [January 16, 2018, 6:46pm UTC](https://community.inventables.com/t/should-i-buy-these-bits/49043/4 "2018-01-16T18:46:48Z")
Ebay has many listings for them. ---
**Author:** ![X-CNC](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/x-cnc/32/50146_2.png) [@X-CNC](https://community.inventables.com/u/X-CNC)\ **Post date:** [January 17, 2018, 1:16am UTC](https://community.inventables.com/t/should-i-buy-these-bits/49043/5 "2018-01-17T01:16:47Z")
I just bought some bits from Drillman. Good shipping and great pricing.